Wacom manual Calibrating the DTU-710, Cross-hairs

Customizing DTU-710 – The Basics

Calibrating the DTU-710

You will need to calibrate the pen display tablet in order to align the screen cursor position with the position of the pen on the display screen. This is required to adjust for parallax caused by the display screen cover glass. Set the DTU-710 in its working position, then follow the procedure below.

1. From the WACOM TABLET Control Panel, select the CALIBRATION tab.

If you are working with multiple monitors, select the Monitor that corresponds to the tablet's LCD display. (Only monitors that are set to one of the resolutions supported by the DTU-710 will appear in the list.)

2. Click on the CALIBTRATE... button to display the monitor calibration screen.

Cross-hairs

Adjustment pattern for phase and pitch. See Adjusting Pitch and Phase (VGA Only) on page 26 for details.

14