Wacom DTU-710 manual General Specifications

Page 34

Specifications

 

 

General Specifications

 

 

Physical dimensions (WxDxH):

418x362x57mm (excluding the stand)

 

Weight:

6.2kg (including the stand)

 

Main Unit input Voltage:

DC12V

 

Power consumption:

37W or less (DC12V)

 

Operating temp. & humidity:

5 to 35 deg. C, 20 to 80%RH (non condensing)

 

Storage temp. & humidity:

-10 to 60deg. C, 20 to 90%RH (non condensing)

 

 

(maximum storage humidity is 38% at 60 deg.C,

 

 

and maximum storage temperature is 42 deg. C at

 

 

90% humidity)

 

 

 

 

LCD Display

 

 

Display:

a-Si TFT active matrix LCD

 

Screen size:

17 inch

 

Resolution (75Hz Max.)

1280x1024 pixels (SXGA), 1024x768 pixels

 

 

(XGA), 800x600 pixels (SVGA), 640x480 pixels

 

 

(VGA)

 

Pixel pitch:

0.264(W) x 0.264(H)mm

 

Color depth:

253 levels: 16,194,277 colors

 

Signal Inputs:

Analog RGB / Digital signals (DVI 1.0)

 

 

Synchronous frequency: Horizontal 30 to 80kHz,

 

 

Vertical 50 to 75Hz

 

 

All scan modes are non-interlaced.

 

Refresh Rate

50 to 75Hz

 

Plug and Play

DDC2B

On a TFT liquid crystal display, a very small number of pixels may be permanently illuminated or not illuminated at all. This does not mean that the display is defective.

34

Image 34
Contents Introduction and Overview Precautions on Use and Handling Page Table of Contents Checking Packed Components Connect DTU-710 to a computer Connect DTU-710 to a computer as adisplayConnect one cable onl y To serial port Tablet Driver Installation WindowsUninstalling The DTU-710 Windows XPCustomizing The DTU-710 The Basics Opening the Wacom Tablet Control PanelControl Panel Basics Customizing The PenControl Panel Details Side switchPen Tip Feel & Eraser Feel Modifier Calibrating the DTU-710 Cross-hairsPage DTU-710 Component Functions Front ViewRear View Stand Adjustment LeverConnector Panel Cover StandUsing an Alternate Mount or Stand Pen Using the PenSide Switch and Second Side Switch Pen TipUsing a Pen Removing the Side SwitchTo reinstall the side switch, reverse the above procedure Contrast Phase VGA only Adjusting the LCD MonitorFactory Presets, Multi-sync, and User Settings Working with OSD On Screen Display MenuColor Vertical Center ResetHorizontal CenterVGA only Menu Position BacklightAdjusting Pitch and Phase VGA only Power Saving HintCaring for DTU-710 CleaningReplacing the Pen Tip Display Troubleshooting TroubleshootingGeneral Display Problems Troubleshooting VGA ProblemsPen Tablet Troubleshooting General ProblemsTroubleshooting Windows\System32 folder. Then restart your computer. When Windows-Specific Problems Macintosh-Specific Problems Specifications General SpecificationsPower Adaptor Support Staff Obtaining Technical SupportAsia Trademarks