Olympus digital voice recorder manual Inserting the battery, Battery indicator

This recorder uses a lithium ion battery specified by Olympus (LI-42B). Do not use any other type of battery.

1Lightly press down on the battery cover release button, then open the battery cover, as shown in the illustration below.

31

2

2Insert the battery observing the correct polarity as shown in the illustration, then close the battery cover.

•Insert the battery by sliding in direction A while pushing down in direction B.

Battery indicator

The battery indicator on the display will decrease as the battery loses power.

•When [] appears on the display, charge the

battery as soon as possible. When the battery is too weak, [s] and [Battery Low] will appear on the display and the recorder will shut down.

Notes

•Turn off the recorder before removing the battery. Removing the battery while the recorder is still in use may cause malfunctions, file corruption or file loss.

•Remove the battery if you are not going to use the recorder for an extended period of time.

•After removing the battery, it could be necessary to set again the time and date if you left the recorder without battery for more than 15 minutes or if you removed the battery right after loading it into the recorder.

1

Inserting the battery

•The supplied battery is not fully charged. It is recommended to fully charge it before using the recorder for the first time or after the battery has been left unattended for a long time (☞ P.12).

EN

11