Olympus digital voice recorder Battery handling precautions, Never heat or incinerate battery

Page 6

Safety precautions

Battery handling precautions

fDanger:

The recorder uses a lithium ion battery specified by Olympus. Charge the battery with the specified AC adapter or charger. Do not use any other AC adapters or chargers.

Battery should never be exposed to flame, heated, short-circuited or disassembled.

Never heat or incinerate battery.

Take precautions when carrying or storing battery to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc.

To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, solder, etc.

If a battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately.

fWarning:

Keep batteries dry at all times.

If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them.

Do not use a battery if it is cracked or broken.

Never subject battery to strong shocks or continuous vibration.

If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the recorder.

If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately.

Keep battery out of the reach of children.

If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor:

1remove the battery immediately while being careful not to burn yourself, and;

2call your dealer or local Olympus representative for service.

fCaution:

Rechargeable battery is exclusively for use with Olympus digital voice recorder DS-3500.

There is a risk of explosion if the battery is replaced with the incorrect battery type.

Dispose of the used battery following the instructions.

Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.

Always charge a rechargeable battery when using it for the first time, or if it has not been used for a long period.

Rechargeable battery have limited lifetime. When the operating time becomes shorter even if the rechargeable battery is fully charged under the specified condition, replace it with a new one.

EN

6

Image 6 Contents
Instructions Thank you for purchasing an Olympus Digital Voice RecorderIntroduction Trademarks and registered trademarksTable of contents Safety precautions Convention used in this manualWord card is used to refer to the SD card and microSD card Keep young children and infants away from the recorder Safety precautionsHandling the recorder Do not operate the unit while operating a vehicleKeep battery out of the reach of children Battery handling precautionsNever heat or incinerate battery Dispose of the used battery following the instructionsLCD monitor Memory CardLarge color LCD display Main featuresAuthentication system via password You can set a priority level on each file recordedIdentification of parts 1SD card slot #OK/MENU button 2Built-in microphone1Current file name 2Current folder Display status indicators LCD panelIdentification of parts File information areaInserting the battery Inserting the batteryBattery indicator Charging the battery Charging the batteryUsing the lithium ion battery Connect the USB cable to the recorderCharging the battery/ Power supply from USB cable For customers in GermanyDetecting abnormal voltage Slide the POWER/HOLD switch to the Hold position Slide the POWER/HOLD switch to the a positionArrow Inserting and ejecting a SD card Memory cardCompatible cards Memory cardMemory card Setting time and date Changing the time and dateRecording By default, the recorder has five folders, A, BRecording related settings RecordingFile RecordingNew recording Press the REC button to start recordingOverwrite recording Select and play the file you want to OverwritePress the Stop button to stop Overwriting Insert recording Original fileTo record with better quality using the hands-free Recording monitorMicrophone Press the Stop button at any point you Volume can be adjusted within a range from 00 toPlayback PlaybackBeginning of the previous file PlaybackAt the end of the file F.Skip Can be set to On or Off P.38Erasing Erase in Folder ErasingErasing files File EraseErasing ErasingPartially erasing a file Any unnecessary part of a file can be erasedPress the Erase button to confirm the erasure Display changes to Partial erasing ! Erasing will startFolder list screen will be displayed 9, 0buttonChanging folders Selecting a fileUse the +, -, 9or 0buttons to select a number Authentication halt modeDevice lock function Press the OK/MENU button to set a numberTurn on the recorder Setting the Author ID and Work TypeSetting the Author ID and Work Type While the recorder is in stop mode, press the NEW buttonVerbal Comment When playing a Verbal Comment, press the Erase buttonWhen playing back a file, press and hold the 9or 0button Verbal CommentF3 Index button Index marksIndex marks While playing back a file, press and hold the 9or 0buttonItem you want to set How to use the menuHow to use the menu OK/MENU buttonLCD/Sound Menu Backlight How to use the menuMenu list BeepMenu items File MenuRec Menu Select On Adjust the start/stop actuation levelMenu items Vcva level can be set to any of 15 different valuesLCD/Sound Menu Select Lighting Time, Dim Light Time or BrightnessSelect the options Device Menu Select Sound or SpeedEditing the Work Type information Entering charactersPress the F2 Finish button Moving the entry columnMaximum entered character count Format Done displays when formatting ends Formatting the card FormatFormatting the card Customizing the recorder Programmable Buttons Customizing the recorderDevice Folders Hands FreeOdms and DSS Player software Odms and DSS Player softwareMinimum requirement Odms software WindowsUsing online help Odms and DSS Player softwareDSS Player software Macintosh Connecting to your PC Connecting to your PC using the USB cableConnecting to your PC Confirm that the record indicator light turns off before Connecting to your PCDisconnecting from your PC WindowsAlarm message list Alarm message listMessage Explanation Action Troubleshooting Troubleshooting Symptom Probable cause ActionTroubleshooting Symptom Probable cause ActionTroubleshooting Accessories optional Specifications Linear PCM format SpecificationsDS2 format MP3 formatFor customers in Europe Technical assistance and supportFor customers in North and South America Technical assistance and supportOlympus Imaging America INC