Olympus digital voice recorder manual Charging the battery, Using the lithium ion battery

Page 12

Charging the battery

1

Charging the battery

After loading the battery into the recorder, you can charge it by connecting the USB cable to the recorder.

Fully charge the battery (approx. 3 hours) before use.

Connect the USB cable to the recorder.

Notes

Charge the battery frequently during the first period of use. The battery will perform better after several charge/discharge cycles.

Models of batteries different from the included one may not be charged.

Charging battery via the USB cable connection may not be successful depending on the power supply capacity of your PC. Use the AC adapter (optional) instead.

Do not charge the recorder through a USB hub.

Do not attach or remove the battery if the USB cable is connected.

Using the lithium ion battery

The included battery is exclusively for use with the Olympus voice recorder DS-3500. Do not use in combination with other electronic equipment.

Cautions concerning the battery

Read the following instructions carefully when you use the battery.

Discharging:

Rechargeable battery self-discharges while not in use. Charge it regularly before use.

Battery life:

Over time, rechargeable battery gradually wear down. When the operating time becomes shorter even if the rechargeable battery is fully charged under the specified condition, replace it with a new one.

Operating temperature:

Rechargeable batteries are chemical products. Battery efficiency may vary even when operating within the recommended temperature range. This is an inherent nature of these products.

Recommended temperature range of use:

During operation:

0°C - 42°C/ 32°F - 107.6°F

Charging:

5°C - 35°C/ 41°F - 95°F

Storage for a long period:

–20°C - 60°C/ –4°F - 140°F

Using the battery outside the above temperature range may result in declining efficiency and shorter battery life.

EN

12

Image 12 Contents
Instructions Thank you for purchasing an Olympus Digital Voice RecorderIntroduction Trademarks and registered trademarksTable of contents Safety precautions Convention used in this manualWord card is used to refer to the SD card and microSD card Safety precautions Handling the recorderKeep young children and infants away from the recorder Do not operate the unit while operating a vehicleBattery handling precautions Never heat or incinerate batteryKeep battery out of the reach of children Dispose of the used battery following the instructionsLCD monitor Memory CardMain features Authentication system via passwordLarge color LCD display You can set a priority level on each file recordedIdentification of parts 1SD card slot #OK/MENU button 2Built-in microphoneDisplay status indicators LCD panel Identification of parts1Current file name 2Current folder File information areaInserting the battery Inserting the batteryBattery indicator Charging the battery Using the lithium ion batteryCharging the battery Connect the USB cable to the recorderCharging the battery/ Power supply from USB cable For customers in GermanyDetecting abnormal voltage Slide the POWER/HOLD switch to the Hold position Slide the POWER/HOLD switch to the a positionArrow Memory card Compatible cardsInserting and ejecting a SD card Memory cardMemory card Setting time and date Changing the time and dateBy default, the recorder has five folders, A, B Recording related settingsRecording RecordingRecording New recordingFile Press the REC button to start recordingOverwrite recording Select and play the file you want to OverwritePress the Stop button to stop Overwriting Insert recording Original fileTo record with better quality using the hands-free Recording monitorMicrophone Volume can be adjusted within a range from 00 to PlaybackPress the Stop button at any point you PlaybackPlayback At the end of the file F.SkipBeginning of the previous file Can be set to On or Off P.38Erasing Erasing filesErasing Erase in Folder File EraseErasing Partially erasing a fileErasing Any unnecessary part of a file can be erasedPress the Erase button to confirm the erasure Display changes to Partial erasing ! Erasing will start9, 0button Changing foldersFolder list screen will be displayed Selecting a fileAuthentication halt mode Device lock functionUse the +, -, 9or 0buttons to select a number Press the OK/MENU button to set a numberSetting the Author ID and Work Type Setting the Author ID and Work TypeTurn on the recorder While the recorder is in stop mode, press the NEW buttonWhen playing a Verbal Comment, press the Erase button When playing back a file, press and hold the 9or 0buttonVerbal Comment Verbal CommentIndex marks Index marksF3 Index button While playing back a file, press and hold the 9or 0buttonHow to use the menu How to use the menuItem you want to set OK/MENU buttonHow to use the menu Menu listLCD/Sound Menu Backlight BeepMenu items File MenuRec Menu Adjust the start/stop actuation level Menu itemsSelect On Vcva level can be set to any of 15 different valuesLCD/Sound Menu Select Lighting Time, Dim Light Time or BrightnessSelect the options Device Menu Select Sound or SpeedEditing the Work Type information Entering charactersPress the F2 Finish button Moving the entry columnMaximum entered character count Format Done displays when formatting ends Formatting the card FormatFormatting the card Customizing the recorder Customizing the recorder Device FoldersProgrammable Buttons Hands FreeOdms and DSS Player software Minimum requirementOdms and DSS Player software Odms software WindowsUsing online help Odms and DSS Player softwareDSS Player software Macintosh Connecting to your PC Connecting to your PC using the USB cableConnecting to your PC Connecting to your PC Disconnecting from your PCConfirm that the record indicator light turns off before WindowsAlarm message list Alarm message listMessage Explanation Action Troubleshooting Troubleshooting Symptom Probable cause ActionTroubleshooting Symptom Probable cause ActionTroubleshooting Accessories optional Specifications Specifications DS2 formatLinear PCM format MP3 formatTechnical assistance and support For customers in North and South AmericaFor customers in Europe Technical assistance and supportOlympus Imaging America INC