English
RECORDING
•To monitor your recording, connect headphones to p.
4. To start recording, press REC 0.
•The REC indicator lights up.
•You can also start recording immediately during playback. Press REC 0.
5.For brief interruptions, adjust PAUSE ;. To deactivate pause, slide the switch back again.
6.To stop recording, press 9 and the set is switched off.
•The REC indicator goes out.
•At the end of a tape, the 1 and REC keys are automatically released and the set switched off, unless PAUSE ; has been activated.
7.To check your recording, use the 5 or 6 keys (see
CASSETTE PLAYBACK).
GENERAL INFORMATION
MAINTENANCE (see fig.4)
•Clean the tape heads every month with a cotton bud dipped in alcohol, or by playing through a cleaning tape.
•Use a soft damp cloth to wipe off dust and dirt. Don't use benzene or corrosives to clean the set.
•Don't expose the set or cassettes to rain, moisture, sand or to excessive heat e.g. cars parked in direct sunlight.
•Don't use
GENERAL INFORMATION
TAKE CARE WHEN USING HEADPHONES
Hearing Safety: Listen at a moderate volume. Use at high volume can impair your hearing!
Traffic Safety: Do not use headphones while driving or cycling as you may cause an accident!
ENVIRONMENTAL NOTE
•The packaging has been minimized so that it is easy to separate into two materials:- cardboard and plastic. Please observe the local regulations regarding the disposal of these packaging materials.
•Please inquire about local regulations on how to hand in your old set for recycling.
This product complies with the radio interference
requirements of the European Community.
8