HF
External Trigger(-)
General Parameters
Intercharacter Delay
Certain terminals and computers require an intercharacter delay to simulate the effects of keystroke delays. Choosing an intercharacter delay causes the characters to be sent at the slower speed required by the device to which you are interfacing.
GA
No Intercharacter Delay
To set Intercharacter Delay to other then zero, scan the
label below and then scan two separate digits from the
Digit Selection page (99 maximum).
NOTE
GB
Intercharacter Delay = XXMEC
Intercharacter delay cannot exceed 99 milliseconds.
NOTE
Interlabel delay allows user to program a delay between transmitted labels.
GC
No interlabel delay *@
GD
Set interlabel delay 0-9.9 seconds
06656 | 21 |