Datalogic Scanning DS1100 SH2347, DS2200 SH2348 manual Appendix a, Hexadecimal Conversion Table

Appendix A

Hexadecimal Conversion Table

To use the conversion table:

1.Find each ASCII character in the tables on the following pages and locate the corresponding bold hexadecimal-equiv- alent character in the top row and in the left column of the table. Notice, for example, that the ASCII character “Q” is represented by the hexadecimal numbers 5 (top) and 1 (left).

2.Scan the bar code symbols that correspond to the hexadeci- mal-equivalent characters. First scan the bar code symbol that corresponds to the bold hex character at the top. Then scan the bar code symbol that corresponds to the bold hex character at the left.

For example, for the ASCII character “Q,” first scan the bar code symbol labeled 5; then scan the bar code symbol labeled 1. If your preamble or postamble contains an “N”, first scan 4 and then E.

3.Repeat this procedure for each ASCII character you wish to enter.

06656 69