Yamaha DPX-1300 manual Adjusting the size of an image Zoom button

Page 30

Adjusting the image

◆Adjusting the size of an image – ZOOM button

Enlarge or reduce the size of the projection image to match the size of the screen. The zoom ratio is 1:1.6.

ZOOM button

AUTO

1. Press the ZOOM button on the

remote control, or press the

SETTING button on the main unit

V. POS	ZOOM	FOCUS
IRIS	SETTING	PATT
ESCAPE		MENU

STANDBY/ON

ESCAPE button

ESCAPE	MENU	SETTING
		SETTING
		button

	repeatedly to select [Zoom] from
	the display menu.
2.	Press the h or g button to adjust
	the image to a suitable size.
3.	To exit from the adjustment
	mode, press the ZOOM or
	ESCAPE buttons.

Zoom

PATTERN	SETTING
ASPECT	INPUT
LAMP COVER TEMP	FAN

◆Adjusting the image focus – FOCUS button

Adjust the focus of the on-screen image.

				1. Press the FOCUS button on the
				remote control, or press the
AUTO				SETTING button on the main unit
V. POS	ZOOM	FOCUS	FOCUS	repeatedly to select [FOCUS]
IRIS	SETTING	PATT	button	from the display menu.
IRIS	SETTING	PATT		from the display menu.
ESCAPE		MENU		Memo
				Memo
	STANDBY/ON

Focus

ESCAPE button

ESCAPE	MENU
PATTERN
ASPECT	INPUT
LAMP COVER TEMP	FAN

SETTING

button

SETTING

•When you want to use the test pattern to adjust image focus press the PATT button on the remote control, or the PATTERN button on the main unit before carrying out step 1.

2.Press the h or g button to adjust the focus of the projected image.

3.To exit from the adjustment mode, press the FOCUS or ESCAPE buttons.

◆Adjusting the iris setting – IRIS button

Press the g button to reduce the aperture of the iris for increased black levels and contrast, or the h button to increase aperture to obtain a brighter image.

AUTO

IRIS	V. POS	ZOOM	FOCUS
button	IRIS	SETTING	PATT
	ESCAPE		MENU

STANDBY/ON

ESCAPE button

ESCAPE	MENU SETTING
	button
PATTERN	SETTING

1.Press the IRIS button on the remote control, or press the SETTING button on the main unit repeatedly to select [IRIS] from the display menu.

Iris

2.Press the h or g button to adjust the iris setting for the projected image.

3.To exit from the adjustment mode, press the IRIS or ESCAPE button.

ASPECT

INPUT

LAMP COVER TEMP FAN

26

Image 30

Contents DPX-1300 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customers onlyIii Table of contents Inappropriate places for installation Accessory checkFeatures Features EnglishMain unit Front panel and controls Main unit Rear panel / Connections Controls and functionsRemote control functions Remote control code switch Remote control EnglishLight switch Remote control cable jackLoading the batteries into the remote control Using the remote control with a wired connectionLimits for using the remote control Distance to sensor Angle to sensorUse within a left/right arc of 30 degrees If you have not installed the main unit or screen PreparationTurn the power on and selecting an image for projection PrepararionSetting up the DPX-1300 Mounting the projector on a tableMounting the projector on the ceiling When using a 43 screen InstallationWhen using a 169 screen Projection distanceUsing V.POS vertical position to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using the adjusters to adjust image positionConnecting to AV components ConnectionFor US model only Connecting to computer devicesInformation for installers + polarity inside Polarity outside GNDProjection English Checking installation and connectionsPre-operation check Projection preparations completeTurning the projector power on Turning the power onPress the STANDBY/ON button Button on the remote control Placing the DPX-1300 in standby mode Lamp may blink when half lit. This is not a defectPress the STANDBY/ON button Selecting an input signal Selecting using the Input buttonProjection image signal Using the Input button to select a signal ProjectionPress the + button to open the submenu Selecting a display aspect for a projection image Press the Aspect buttonRemote cotrol Display aspect types Input signal typeInput imageDisplay aspectProjected image Representative examplesPattern button Adjusting the imageAdjusting the vertical position V.POS button Crosshatch pattern Grayscale pattern Color bar patternAdjusting the size of an image Zoom button Menu configurations Menu screenMenu items Menu item listSubmenu Items Lower level menu itemsMenu group items and functions Menu Adjusts the analog input signal gain and offset settings Level AdjustmentAdjusts the iris Optical White PeakingSignal Menu EnglishOvershoot Supp. Range Signal LevelSignal Status Overshoot Supp. LevelInitial Setup Trigger Out Menu ColorMessage Baud RateMenu operations Reset button Remote control onlyRemote Control Operation button functionsMenu screen Menu operations 1 with no submenuPress the Menu button to open Press the + or button to select a menu groupRemote Control Main Unit Menu Button Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main UnitPress the + button to move to the submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Appears to the right of items that contain a submenuSpecial operations See page 32 for datails about each color itemExample Using the color temperature fixed mode Example Color temperature fixed modeName of the selected item appears here Resetting the selected settings Resetting all the settingsChanging the position of the menu screen Resetting the lamp running time Subtitle ZoomChanging the Gamma Press the buttonInline menu composition Adjusting image quality using the inline menuExample Using the inline menu Inline menu item listUsing the remote control Memory configurationsSaving memory settings Using the menuBottom of the screen Memory function EnglishPress the g button to select Memory number status from Press the h or g button to select a memory numberDeactivating Memory Lock Setting Memory LockMemory lock Select the memory number youCopy source Memory copyRecall the memory number to be Press the g button to selectPress the + button to display the confirmation screen Resetting to the default settings in the memory menu Initialization of the currently selected memoryInitialization of all the memories Glossary ReferenceCompatible signal types Signal type Active Component type Pixels Lines KHz Reference EnglishMaintenance Regular careReplacing the filter Replacing the lamp Loosen the lamp cover screwsLamp cover screws Troubleshooting To protect the lamp, you cannot turn onTroubleshooting Message display Message ConditionLED indicator meanings LED indicator State MeaningControls SpecificationsOptical GeneralDimensional drawing 119.1C2005 All Rights Reserved