Yamaha DPX-1300 manual Specifications, Optical, Controls, General

	Specifications
• Optical
Projection mode	DLPTM (DMDTM) type, 1280 X 720 pixels, 0.8 inch
Lens	f=24.3 – 38.9 mm F=2.7 – 5.0, Electronic zoom(x 1.6), Electronic focus, Electronic lens shift
Lamp	270 W SHP lamp
Screen size	60–200 inch (16:9)
Brightness	800 – 400 ANSI lm (depends on Iris Setting)
Contrast	2500:1 to 5000:1 (depends on Iris Setting)
• Input
Color system	NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
VIDEO	Composite signal	1Vp-p/75 Ω, Negative sync
S VIDEO	S-Video signal	Y:1Vp-p/75 Ω, Negative sync
		C:0.286 or 0.3Vp-p/75 Ω
D4 VIDEO	Component signal	Y with sync:1Vp-p/75 Ω, Negative sync
		(480i, 576i, 480p, 576p)
		Y with sync:1Vp-p/75 Ω, 3 values sync
		(1035i, 1080i, 720p)
		PB/CB, PR/CR:0.7Vp-p/75 Ω
INPUT A/INPUT B	Component signal	Y with sync:1Vp-p/75 Ω, Negative sync (480i, 576i, 480p, 576p)
		Y with sync:1Vp-p/75 Ω, 3 values sync (1035i, 1080i, 720p)
		PB/CB, PR/CR:0.7Vp-p/75 Ω
	RGB signal	G with sync:1Vp-p/75 Ω, Negative sync
		(480i, 576i, 480p, 576p)
		G with sync:1Vp-p/75 Ω, 3 values sync
		(1035i, 1080i, 720p)
		G:0.7Vp-p/75 Ω
		(When using HD/VD or SYNC)
		B, R:0.7Vp-p/75 Ω
		HD, VD:1–5Vp-p/2.2kΩ, positive and negative sync
		SYNC:2Vp-p/2.2kΩ, Negative sync (with video signals) (480i, 576i)
		SYNC:0.6–5Vp-p/2.2kΩ, Negative sync (without video signals)
		(480i, 576i, 480p, 576p)
HDMI	Digital RGB/component signal
DVI	Digital RGB signal
• Controls
Remote	RS-232C (D-sub 9 pins)
Trigger	+12 V/Max 200 mA when the power is on
Wireless remote	1 in front, 1 at rear
Wired remote	1 input jack, 1 output jack
• General
Usable temperature range	5 °C – 35 °C
Usable humidity range	30 % – 85 %(There should be no condensation)
Power supply	AC100 – 120 V/220 – 240 V, 50/60 Hz
Power consumption	395 W
Power consumption in standby mode	0.1 W – 0.2 W
Noise level	30 dB(Standard mode), 28 dB(When Lamp Power Mode is set to 80)
Dimension	495(W) x 192.6(H) x 465.4(D) mm
Weight	14.0 kg

64