Yamaha DPX-1300 manual Example Using the color temperature fixed mode

Page 47

Menu operations

Example: Using the color temperature fixed mode

Use this mode when you want to adjust the RGB coordinate while keeping the color temperature setting unchanged.

1.Select [Color Adjustment] in the [Image] group from the main menu.

2.Press the + button to enter submenus.

3.Select [WRGB] from the [Standard], [WRGB], [WRGBYCM] using the h or g button, and press the + button.

4.Press the h, g, +, or - button to select W (Color temperature and h UV) from the color scale, and press the button.

The color temperature adjustment area on the right side of the menu screen will be highlighted in white.

5.Press the h, g, +, or - button to adjust the color temerature.

6.Press the button to enter the color temperature fixed mode.

The “ ” icon appears on the W (Color temperature and h UV ) box.

Memo

•In this mode, you cannot use the h, g, +, or - button to change the color temperature. If you try to change, “The color temperature is fixed.” appears at the bottom of the menu screen.

7.Press the ESCAPE button to return to the color scale. Follow steps 4 to 5 in the “Example: Adjusting R (Red)” on page 42 to adjust the color coordinates.

Memo

•When using the color temperature fixed mode, the gain adjustment area will not be displayed.

•To cancel the color temperature fixed mode, select the W (Color temperature and h UV) box and press the button until the “ ” icon disappeares.

9

Menu

The name of the selected item appears here.

When this unit is in the color temperature fixed mode, the “ ” icon appears on this W (Color temperature and h UV) box.

Example:	Example:
Color temperature fixed mode	Normal mode

		Move Men					Move Men
Image	Signal				Image	Signal
Color Temp.					Color Temp.
y					y
			Press the	button.
0.5					0.5
							When this unit is in the
							normal mode, the “	”
0.0			Press the	button.	0.0		icon dissapears.
0.0	0.5	x			0.0	0.5	x
0.0	0.5	x			0.0	0.5	x
ESCAPE : Return					ESCAPE : Return

English

43

Image 47

Contents DPX-1300 Important Safety Instructions FCC Information for US customers only We Want You Listening For a LifetimeIii Table of contents Accessory check Inappropriate places for installationFeatures English FeaturesMain unit Front panel and controls Controls and functions Main unit Rear panel / ConnectionsRemote control functions Remote control cable jack Remote control EnglishLight switch Remote control code switchUsing the remote control with a wired connection Loading the batteries into the remote controlUse within a left/right arc of 30 degrees Limits for using the remote controlDistance to sensor Angle to sensor Preparation If you have not installed the main unit or screenPrepararion Turn the power on and selecting an image for projectionMounting the projector on the ceiling Setting up the DPX-1300Mounting the projector on a table Projection distance InstallationWhen using a 169 screen When using a 43 screenUsing the adjusters to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using V.POS vertical position to adjust image positionConnection Connecting to AV components+ polarity inside Polarity outside GND Connecting to computer devicesInformation for installers For US model onlyProjection preparations complete Checking installation and connectionsPre-operation check Projection EnglishPress the STANDBY/ON button Button on the remote control Turning the projector power onTurning the power on Press the STANDBY/ON button Placing the DPX-1300 in standby modeLamp may blink when half lit. This is not a defect Projection image signal Selecting an input signalSelecting using the Input button Press the + button to open the submenu Using the Input button to select a signalProjection Remote cotrol Selecting a display aspect for a projection imagePress the Aspect button Display aspect types Representative examples Input signal typeInput imageDisplay aspectProjected imageCrosshatch pattern Grayscale pattern Color bar pattern Adjusting the imageAdjusting the vertical position V.POS button Pattern buttonAdjusting the size of an image Zoom button Menu screen Menu configurationsMenu item list Menu itemsLower level menu items Submenu ItemsMenu group items and functions Menu White Peaking Level AdjustmentAdjusts the iris Optical Adjusts the analog input signal gain and offset settingsMenu English SignalOvershoot Supp. Level Signal LevelSignal Status Overshoot Supp. RangeInitial Setup Baud Rate Menu ColorMessage Trigger OutOperation button functions Reset button Remote control onlyRemote Control Menu operationsPress the + or button to select a menu group Menu operations 1 with no submenuPress the Menu button to open Menu screenRemote Control Main Unit Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main Unit Menu ButtonAppears to the right of items that contain a submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Press the + button to move to the submenuSee page 32 for datails about each color item Special operationsName of the selected item appears here Example Using the color temperature fixed modeExample Color temperature fixed mode Changing the position of the menu screen Resetting the selected settingsResetting all the settings Subtitle Zoom Resetting the lamp running timePress the button Changing the GammaInline menu item list Adjusting image quality using the inline menuExample Using the inline menu Inline menu compositionUsing the menu Memory configurationsSaving memory settings Using the remote controlPress the h or g button to select a memory number Memory function EnglishPress the g button to select Memory number status from Bottom of the screenSelect the memory number you Setting Memory LockMemory lock Deactivating Memory LockPress the g button to select Memory copyRecall the memory number to be Copy sourcePress the + button to display the confirmation screen Initialization of the currently selected memory Resetting to the default settings in the memory menuInitialization of all the memories Reference GlossaryCompatible signal types Reference English Signal type Active Component type Pixels Lines KHzReplacing the filter MaintenanceRegular care Lamp cover screws Replacing the lampLoosen the lamp cover screws To protect the lamp, you cannot turn on TroubleshootingTroubleshooting Message Condition Message displayLED indicator State Meaning LED indicator meaningsGeneral SpecificationsOptical Controls119.1 Dimensional drawingC2005 All Rights Reserved