Yamaha DPX-1300 manual Message display, Message Condition

Page 66

	Message display

Message	Condition

No Signal	The unit is not receiving or detecting any signal at the selected input jack. This message is
	displayed together with the name of the input source selected with the INPUT button.

INPUT A (Component) (Example)	The input name selected by the INPUT button is displayed. It will turn off 2 seconds after
	the signal has been input.

Out Of Range	The unit is not able to decode the PC or HDMI signal currently being input.

Unknown Format	The unit is not able to decode the video signal currently being input.

Auto Sync...	The unit is setting itself to the most appropriate configuration for the RGB signal currently
	being received.

Memory 1—6 Now Processing	The memory setting number is displayed for two seconds.

The lamps has reached its recommended	This message is displayed when the power switch is turned on if the lamp running time
replacement time. Please replace with a new	exceeds 2000 hours. Press the ESCAPE button to remove the message.
one.

Press again to enter standby.	Press the STANDBY/ON button once more to place the unit in standby mode.

Lens Adjustment is locked.	This message will be displayed for two seconds if you press the V. POS, ZOOM, or FOCUS
	button when [Lens Adjustment Lock] is set to [On].

Invalid Operation	Appears in the menu operation guide when you press an invalid button during menu
	operation. This message will be displayed for two seconds.

The color temp is fixed	Appears in the menu operation guide when you try to change the settings for the color
	temperature in the color temperature fixed mode.

Please wait	Appears in the menu screen when the unit requres few seconds for swiching process to the
	selected menu item.

62

Image 66

Contents DPX-1300 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customers onlyIii Table of contents Inappropriate places for installation Accessory checkFeatures Features EnglishMain unit Front panel and controls Main unit Rear panel / Connections Controls and functionsRemote control functions Remote control code switch Remote control EnglishLight switch Remote control cable jackLoading the batteries into the remote control Using the remote control with a wired connectionLimits for using the remote control Distance to sensor Angle to sensorUse within a left/right arc of 30 degrees If you have not installed the main unit or screen PreparationTurn the power on and selecting an image for projection PrepararionSetting up the DPX-1300 Mounting the projector on a tableMounting the projector on the ceiling When using a 43 screen InstallationWhen using a 169 screen Projection distanceUsing V.POS vertical position to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using the adjusters to adjust image positionConnecting to AV components ConnectionFor US model only Connecting to computer devicesInformation for installers + polarity inside Polarity outside GNDProjection English Checking installation and connectionsPre-operation check Projection preparations completeTurning the projector power on Turning the power onPress the STANDBY/ON button Button on the remote control Placing the DPX-1300 in standby mode Lamp may blink when half lit. This is not a defectPress the STANDBY/ON button Selecting an input signal Selecting using the Input buttonProjection image signal Using the Input button to select a signal ProjectionPress the + button to open the submenu Selecting a display aspect for a projection image Press the Aspect buttonRemote cotrol Display aspect types Input signal typeInput imageDisplay aspectProjected image Representative examplesPattern button Adjusting the imageAdjusting the vertical position V.POS button Crosshatch pattern Grayscale pattern Color bar patternAdjusting the size of an image Zoom button Menu configurations Menu screenMenu items Menu item listSubmenu Items Lower level menu itemsMenu group items and functions Menu Adjusts the analog input signal gain and offset settings Level AdjustmentAdjusts the iris Optical White PeakingSignal Menu EnglishOvershoot Supp. Range Signal LevelSignal Status Overshoot Supp. LevelInitial Setup Trigger Out Menu ColorMessage Baud RateMenu operations Reset button Remote control onlyRemote Control Operation button functionsMenu screen Menu operations 1 with no submenuPress the Menu button to open Press the + or button to select a menu groupRemote Control Main Unit Menu Button Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main UnitPress the + button to move to the submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Appears to the right of items that contain a submenuSpecial operations See page 32 for datails about each color itemExample Using the color temperature fixed mode Example Color temperature fixed modeName of the selected item appears here Resetting the selected settings Resetting all the settingsChanging the position of the menu screen Resetting the lamp running time Subtitle ZoomChanging the Gamma Press the buttonInline menu composition Adjusting image quality using the inline menuExample Using the inline menu Inline menu item listUsing the remote control Memory configurationsSaving memory settings Using the menuBottom of the screen Memory function EnglishPress the g button to select Memory number status from Press the h or g button to select a memory numberDeactivating Memory Lock Setting Memory LockMemory lock Select the memory number youCopy source Memory copyRecall the memory number to be Press the g button to selectPress the + button to display the confirmation screen Resetting to the default settings in the memory menu Initialization of the currently selected memoryInitialization of all the memories Glossary ReferenceCompatible signal types Signal type Active Component type Pixels Lines KHz Reference EnglishMaintenance Regular careReplacing the filter Replacing the lamp Loosen the lamp cover screwsLamp cover screws Troubleshooting To protect the lamp, you cannot turn onTroubleshooting Message display Message ConditionLED indicator meanings LED indicator State MeaningControls SpecificationsOptical GeneralDimensional drawing 119.1C2005 All Rights Reserved