Yamaha DPX-1300 manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the bottom of the unit.

Retain this Owner’s Manual in a safe place for future reference.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 Be sure to allow spaces of at least 30cm above, behind and on both sides the unit.

16 Do not place the following objects on this unit:

A vessel with water in it. If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/or you may get an electric shock.

i

Page 1 Page 3
Image 2
Page 1 Page 3
Contents DPX-1300 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customers onlyIii Table of contents Inappropriate places for installation Accessory checkFeatures Features EnglishMain unit Front panel and controls Main unit Rear panel / Connections Controls and functionsRemote control functions Remote control code switch Remote control EnglishLight switch Remote control cable jackLoading the batteries into the remote control Using the remote control with a wired connectionUse within a left/right arc of 30 degrees Limits for using the remote controlDistance to sensor Angle to sensor If you have not installed the main unit or screen PreparationTurn the power on and selecting an image for projection PrepararionMounting the projector on the ceiling Setting up the DPX-1300Mounting the projector on a table When using a 43 screen InstallationWhen using a 169 screen Projection distanceUsing V.POS vertical position to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using the adjusters to adjust image positionConnecting to AV components ConnectionFor US model only Connecting to computer devicesInformation for installers + polarity inside Polarity outside GNDProjection English Checking installation and connectionsPre-operation check Projection preparations completePress the STANDBY/ON button Button on the remote control Turning the projector power onTurning the power on Press the STANDBY/ON button Placing the DPX-1300 in standby modeLamp may blink when half lit. This is not a defect Projection image signal Selecting an input signalSelecting using the Input button Press the + button to open the submenu Using the Input button to select a signalProjection Remote cotrol Selecting a display aspect for a projection imagePress the Aspect button Display aspect types Input signal typeInput imageDisplay aspectProjected image Representative examplesPattern button Adjusting the imageAdjusting the vertical position V.POS button Crosshatch pattern Grayscale pattern Color bar patternAdjusting the size of an image Zoom button Menu configurations Menu screenMenu items Menu item listSubmenu Items Lower level menu itemsMenu group items and functions Menu Adjusts the analog input signal gain and offset settings Level AdjustmentAdjusts the iris Optical White PeakingSignal Menu EnglishOvershoot Supp. Range Signal LevelSignal Status Overshoot Supp. LevelInitial Setup Trigger Out Menu ColorMessage Baud RateMenu operations Reset button Remote control onlyRemote Control Operation button functionsMenu screen Menu operations 1 with no submenuPress the Menu button to open Press the + or button to select a menu groupRemote Control Main Unit Menu Button Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main UnitPress the + button to move to the submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Appears to the right of items that contain a submenuSpecial operations See page 32 for datails about each color itemName of the selected item appears here Example Using the color temperature fixed modeExample Color temperature fixed mode Changing the position of the menu screen Resetting the selected settingsResetting all the settings Resetting the lamp running time Subtitle ZoomChanging the Gamma Press the buttonInline menu composition Adjusting image quality using the inline menuExample Using the inline menu Inline menu item listUsing the remote control Memory configurationsSaving memory settings Using the menuBottom of the screen Memory function EnglishPress the g button to select Memory number status from Press the h or g button to select a memory numberDeactivating Memory Lock Setting Memory LockMemory lock Select the memory number youCopy source Memory copyRecall the memory number to be Press the g button to selectPress the + button to display the confirmation screen Resetting to the default settings in the memory menu Initialization of the currently selected memoryInitialization of all the memories Glossary ReferenceCompatible signal types Signal type Active Component type Pixels Lines KHz Reference EnglishReplacing the filter MaintenanceRegular care Lamp cover screws Replacing the lampLoosen the lamp cover screws Troubleshooting To protect the lamp, you cannot turn onTroubleshooting Message display Message ConditionLED indicator meanings LED indicator State MeaningControls SpecificationsOptical GeneralDimensional drawing 119.1C2005 All Rights Reserved
Top Page Image Contents