Barco E-2320 C (SE) system manual Barco

BARCO MXRT control panel settings

configuration controls on this tabbed dialog to obtain the desired display parameters for the selected application.

To remove the selected configuration profile completely, select the name of the application from the Configuration Profiles listbox click Delete.

Note: You cannot delete the factory-set configuration profiles.

Click the Apply or OK button to enable your Configuration settings.

Barco

The Barco page allows you to switch between True Color Mode

(32-bit) and 256 Color Mode (8-bit). Use the 256 Color Mode (8-bit) if your application requires a specific grayscale palette mode such as User Modifiable Color Palette, Static Gray Palette, or Static Gray Palette with NO system colors. Otherwise use the True Color Mode (32-bit).

When the 256 Color Mode is enabled you can select one of three palette modes:

User Modifiable Color Palette: This option allows applications to modify the palette contents dynamically. This mode reserves the first 10 and last 10 entries in the palette for the Windows operating system, but applications can manipulate the middle 236 entries. This is the standard palette mode as configured by Windows.

Static Gray Palette including standard system colors: This option sets the palette to be a static linear set of 236 gray values. The . Applications are denied the ability to dynamically change or allocate palette entries.

Static Gray Palette with NO system colors: This option sets the palette to be a static linear ramp of 256 shades of gray. Applications are denied the ability to dynamically change or allocate palette entries.

Please refer to the on-line help for more information on using advanced features such as the different palette modes available when using the 256 Color Mode.

63