Barco E-2320 C (SE) system manual Parts, controls and connectors, Front

Parts, controls and connectors

Parts, controls and connectors

Front

BARCO

Figure 1

1.Control wheel

The control wheel can be pressed like a push button and rotated like a knob.

It allows to put the display in stand-by, navigate through the on-screen display (OSD) menus and change values in the OSD.

2.USB downstream port. See also item “6.” on page 27

3.Power LED

The LED is off when the display is disconnected from the power. The LED is also off when the LED function is disabled in the on-screen display (OSD).

The LED is green when the display is on (when enabled in the on-screen menus).

The LED is orange when the display is in Stand-by power- saving mode.

26