Barco E-2320 C (SE) system manual Settings

	Display operation
Settings
Name	Description
DPMS	Switch on/off the automatic power saving
	system (DPMS)
Power LED	Switch the power LED on/off. Note: The
	LED's orange DPMS state is not influenced
	by this setting. So, when the display goes
	into power-saving mode, the LED will turn
	orange, even if it was switched off by this
	setting.
User Controls	Disable the control wheel functions
Color Temp.	Select a color temperature
Preferred Input Freq.	Click the control wheel to select the desired
	vertical frequency of the input video signal.
	Select the best frequency corresonding to
	your graphic board (see the documentation
	of your graphic board).
	After changing this setting you must reboot
	the PC so that the graphic board changes
	the vertical frequency of the video signal.
Automatic Menu Exit	Switch the automatic menu exit feature on/
	off. When switched on, the OSD menus
	automatically close when left idle for some
	time.

79