Chapter 5
Scan to a memory card or USB Flash memory drive
You can scan monochrome and colour documents into a memory card or USB Flash memory drive. Monochrome documents will be stored in PDF (*.PDF) or TIFF file formats (*.TIF). Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The default setting is Color 150 dpi and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see the Quick Setup Guide.) For example, the fifth image scanned on July 1, 2009 would be named 01070905.PDF. You can change the colour and quality.
Quality |
| Selectable File |
|
| Format |
Color 150 | dpi | JPEG / PDF |
Color 300 | dpi | JPEG / PDF |
Color 600 | dpi | JPEG / PDF |
B/W 200x100 dpi | TIFF / PDF | |
B/W 200 dpi | TIFF / PDF | |
a Insert a Memory Stick®, Memory Stick Pro™, SD, SDHC,
WARNING
DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or data stored on the card.
b Load your document.
c Press 
(Scan).
40
d Press a or b to choose
Scan to Media, do one of the following:
To change the quality press OK and go to step e.
To start scanning press Mono Start or Colour Start.
e Press a or b to choose the quality, and then press OK.
Do one of the following.
To change the file type, go to step f.
To start scanning press Mono Start or Colour Start.
f Press a or b to choose the file type and then press OK.
Press Mono Start or Colour Start.
Changing the image quality
a
b Press a or b to choose 2.PhotoCapture. Press OK.
c Press a or b to choose 0.Scan to Media. Press OK.
d Press a or b to choose 1.Quality. Press OK.
e Press a or b to choose
Color 150 dpi, Color 300 dpi, Color 600 dpi, B/W 200x100 dpi or B/W 200 dpi.
Press OK.
f Press Stop/Exit.