g The machine will automatically reset the ink dot counter.
Note
•If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (Did You Change Blck?). For each new cartridge you installed, press a (Yes) to automatically reset the ink dot counter for that colour. If the ink cartridge you installed is not a brand new one, be sure to press b (No).
•If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridge, check that the ink cartridges are installed correctly.
WARNING
If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.
CAUTION
DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.
DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin.
If ink gets on your skin or clothing immediately wash it off with soap or detergent.
If you mix the colours by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.
70
Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package.
DO NOT dismantle or tamper with the ink cartridge, this can cause the ink to leak out of the cartridge.
Cleaning the outside of the machine
Clean the outside of the machine as follows:
CAUTION
Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the machine.
DO NOT use cleaning materials that contain ammonia.
DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.
a Pull the paper tray completely out of the machine.