Brother HL-4070CDW setup guide Control panel

Getting Started

2Control panel

1Menu buttons

„ +

Scroll backward through menus and the available options.

7 „ -

Scroll forward through menus and the available options.

„OK

Choose the control panel menu.

6Select the chosen menus and settings.

			„ Back
			Go back one level in the menu structure.
	2		Reprint button
1			Choose the reprint menu.
		3	Go button

		Clear error messages.
		Pause and continue printing.
	4	Cancel button
2		Stop and cancel the print operation in progress.
		Exit from a menu (control panel menu, reprint menu or Direct

	5	Print menu)
		5 Direct Print LED: Blue
		„ On
3		USB device is inserted into the USB direct interface.

„ Off

4	USB device is not inserted into the USB direct interface.
	Direct Print button
	Switch to Direct Print mode when USB memory is inserted into
	the USB direct interface.

6LCD back light

„Off

The printer is off or in sleep status.

„Green (General)

Ready to print / Printing / Warming up / Job cancelling

„Red (Error)

There is a problem with the printer.

„Orange (Setting)

Choose a menu (control panel menu, reprint menu or Direct Print menu) or Pause

LCD messages

The message on the LCD shows the current printer status during normal operation.

The o marks indicate the status of the toner in the toner cartridges.When the o mark blinks (n), the indicated toner is nearly empty. When toner becomes empty, the o indicator disappears completely.

The mark indicates the wireless status of electric wave with four levels. ( means no signal, means

weak, means middole, and means strong.)

7Data LED: Yellow

„On

Data is in the printer memory.

„Blinking

Receiving / processing data

„Off

No remaining data in the memory.

For the control panel details, see Chapter 4 of the User’s Guide on the CD-ROM.

8