Installing the Printer Driver
Windwos®
7
8
9
Ensure the
Refer to the instruction manual that came with your access point to set the SecureEasySetup™ mode of your access point.
Put the printer in SecureEasySetup™ mode using the control panel.
1Press any of the Menu buttons (+,
Ready
h
Select ab or OK
Machine Info.
2Press the + or - button to select LAN.
Select ab or OK
LAN
3Press OK to move to the next menu level.
LAN
Wired
4Press the + or - button to select WLAN.
LAN
WLAN
5Press the + or - button to select
Setup WLAN in WLAN menu.
WLAN
Setup WLAN
6Press OK to move to select the next level.
Setup WLAN
Setup Wizard
7Press the + or - button to select
SecureEasySetup.
Setup WLAN
SecureEasySetup
8Press OK.
If the following message appears, press OK again.
WLAN Enable?
On
Note
The message above only appears when the wireless setting is disable.
9The wireless network connection status using the SecureEasySetup™ software will be displayed; Connecting WLAN,
Connected or Connection NG.
Connecting WLAN is displayed when the print server is trying to make connections to your router or access point. Wait till either Connected or
Connection NG is displayed.
Connected is displayed when the print server is successfully connected to your router or access point. You can now use your printer in a wireless network.
Connection NG is displayed when the print server has not successfully connected to your router or access point. Try starting from 3 again. If the same message is displayed again, reset the print server back to the default factory settings and try again.
10 Click Finish. Relocate the printer to a location that is within range of your access point.
® | Wireless Network |
Windwos |
|
27