Brother HL-4070CDW setup guide For Network Users, BRAdmin Light utility For Windows users

For Network Users

1BRAdmin Light utility (For Windows® users)

The BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

Note

•If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from http://solutions.brother.com.

•If you are using Personal Firewall software (e.g. the Internet Connection Firewall available in Windows® XP), disable it. Once you are sure that you can print, re-start your Personal Firewall software.

Installing the BRAdmin Light configuration utility

Note

The default password for the print server is

‘access’. You can use BRAdmin Light to change this password.

1 Click Install Other Drivers or Utilities on the menu screen.

2 Click BRAdmin Light and follow the on-screen instructions.

Setting your IP address, Subnet Mask and Gateway using BRAdmin Light

Note

If you have a DHCP/BOOTP/RARP server in your network, you don’t have to do the following operation. Because the print server will automatically obtain its IP address.

1 Start BRAdmin Light. It will search for new devices automatically.

2 Double-click the unconfigured device.

3 Choose Static for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK.

4 The address information will be saved to the printer.

50