Brother HL-4070CDW setup guide Configuration in Infrastructure mode

Page 46

STEP 2 Installing the Printer Driver

Macintosh®

Network

Wireless

Macintosh®

Configuration in Infrastructure mode

Before you configure the wireless settings

Important

Before configuring the wireless settings, confirm your network environment.

The users that can temporary connect with a network cable for configuration:

You do not need to reset the print server and enable the WLAN setting. Go to Configure the wireless settings on this page.

The users that do not have a network cable or cannot temporarily connect the Brother wireless device to your access point:

If you have previously configured the wireless settings of the printer, you must reset the print server back to the default factory settings (see page 52) and enable the WLAN setting from the control panel.See Set the wireless network enable using the contol panel on this page.

Set the wireless network enable using the contol panel

1 Make sure that the printer power switch is on.

2 Press any of the Menu buttons (+, -, OK or Back) to take the printer offline.

Ready

h

Select ab or OK

Machine Info.

3 Press the + or - button to select LAN.

Select ab or OK

LAN

4 Press OK to move to the next menu level.

LAN

Wired

5 Press the + or - button to select WLAN.

LAN

WLAN

6 Press OK to move to select the next level.

WLAN

TCP/IP

7 Press the + or - button to select WLAN Enable.

WLAN

WLAN Enable

8 Press OK to move to select the next level.

WLAN Enable

Off

9 Press the + or - button to select On.

WLAN Enable

On

10 Press OK.

Accepted appears on the second line of the LCD.

WLAN Enable

Accepted

The WLAN setting is enable.

Configure the wireless settings

1 Click Install Printer Driver.

44

Image 46

Contents Quick Setup Guide Symbols used in this guide Table of Contents Safety Precautions To Use the Printer SafelySafety Precautions Regulations Industry Canada Compliance Statement For CanadaVaroitus IEC 60825-1 specification 220 to 240 volt model onlyFor Finland and Sweden VarningWiring information for UK Important For Your SafetyIT power system For Norway only Disconnect deviceWhat is in the box? Getting StartedControl panel Supplied CD-ROM Setting Up the Machine Put the CD-ROM into the CD-ROM driveRemove the packing materials from the printer Installing the toner cartridges Load paper in the paper trayPrint a test Do not connect the interface cable yetSetting your language on the control panel Installing the Printer Driver StepFor USB interface cable users Click Install Printer Driver on the menu screenClick USB cable users Setup is now complete For parallel interface cable users Installing the driver and connecting the printer toClick Install Printer Driver on the menu Your computerTurn on the printer power switch For wired network interface cable users Click Network cable usersChoose Brother Peer-to-Peer Network For shared network printer users Choose Network Shared Printer, and then click Next For wireless network users Infrastructure ModeConfirm your network environment Choose Wireless Setup and Driver Install Click Wireless Network usersClick Install Printer Driver LAN Installing the printer driver Choose Standard Installation, and then click NextConfiguration in Infrastructure mode Set the wireless network enable using the contol panel„ If you can temporarily connect with a network cable Record the current wireless Select and right click Improper Setup Next For Mac OS 10.3 or greater users Setup is now complete Connecting the printer to your MacintoshInstalling the driver For Mac OS 10.2.4 to 10.2.8 usersFor Mac OS 10.2.4 to 10.2.8 users Setup is now complete Click Print Center, then Quit Print CenterFor network interface cable users Installing the Printer Driver Network Wireless Confirm your network environment SecureEasySetup function of my access Choose I’d like to useFor Mac OS 10.2.4 to 10.2.8 users Go to step For Mac OS 10.3 or greater users Setup is now complete Configuration in Infrastructure mode Choose Manual and then click Next Click the Network tab to see the available Your wireless network is connected successfully Message will appear during the installation This installationIf your wireless settings fail, and error Printer driver and the installation will beInstalling the Printer Driver Click Install Other Drivers or Utilities on the menu screen BRAdmin Light utility For Windows usersFor Network Users BRAdmin Light utility For Mac OS X users Choose Library, Printers, Brother and then UtilitiesNetwork default settings Print the Printer SettingsOptions Consumables and OptionsConsumables Other Information Shipment of the printerCopyright and License LR1447001