Brother HL-4070CDW Important For Your Safety, Disconnect device, IT power system For Norway only

Page 8

Safety Precautions

IMPORTANT - For Your Safety

To ensure safe operation, the supplied three-pin plug must be inserted only into a standard three-pin power outlet that is properly grounded through the normal household wiring.

Extension cords used with this printer must be three- pin plug type and correctly wired to provide proper grounding. Incorrectly wired extension cords may cause personal injury and equipment damage.

The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, call a qualified electrician.

This product should be connected to an AC power source within the range indicated on the rating label. DO NOT connect it to a DC power source. If you are not sure, contact a qualified electrician.

Maschinenlärminformations- Verordnung 3. GPSGV (For Germany only)

Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN ISO 7779.

Disconnect device

You must install this printer near a power outlet that is easily accessible. In case of an emergency, you must disconnect the power cord from the power outlet to shut off the power completely.

Caution for LAN connection

Connect this product to a LAN connection that is not subjected to over voltages.

IT power system (For Norway only)

This product is also designed for an IT power system with phase-to-phase voltage 230V.

Wiring information (for UK)

Important

If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the original fuse.

Always replace the fuse cover. Never use a plug that does not have a cover.

Warning - This printer must be earthed.

The wires in the mains lead are coloured in line with the following code:

Green and Yellow: Earth

Blue:Neutral

Brown:Live

If in any doubt, call a qualified electrician.

6

Image 8

Contents Quick Setup Guide Symbols used in this guide Table of Contents Safety Precautions To Use the Printer SafelySafety Precautions Regulations Industry Canada Compliance Statement For CanadaIEC 60825-1 specification 220 to 240 volt model only For Finland and SwedenVaroitus VarningImportant For Your Safety IT power system For Norway onlyWiring information for UK Disconnect deviceWhat is in the box? Getting StartedControl panel Supplied CD-ROM Setting Up the Machine Put the CD-ROM into the CD-ROM driveRemove the packing materials from the printer Installing the toner cartridges Load paper in the paper trayPrint a test Do not connect the interface cable yetSetting your language on the control panel Installing the Printer Driver StepClick USB cable users Click Install Printer Driver on the menu screenFor USB interface cable users Setup is now complete Installing the driver and connecting the printer to Click Install Printer Driver on the menuFor parallel interface cable users Your computerTurn on the printer power switch For wired network interface cable users Click Network cable usersChoose Brother Peer-to-Peer Network For shared network printer users Choose Network Shared Printer, and then click Next For wireless network users Infrastructure ModeConfirm your network environment Click Install Printer Driver Click Wireless Network usersChoose Wireless Setup and Driver Install LAN Installing the printer driver Choose Standard Installation, and then click NextConfiguration in Infrastructure mode Set the wireless network enable using the contol panel„ If you can temporarily connect with a network cable Record the current wireless Select and right click Improper Setup Next Connecting the printer to your Macintosh Installing the driverFor Mac OS 10.3 or greater users Setup is now complete For Mac OS 10.2.4 to 10.2.8 usersFor Mac OS 10.2.4 to 10.2.8 users Setup is now complete Click Print Center, then Quit Print CenterFor network interface cable users Installing the Printer Driver Network Wireless Confirm your network environment SecureEasySetup function of my access Choose I’d like to useFor Mac OS 10.2.4 to 10.2.8 users Go to step For Mac OS 10.3 or greater users Setup is now complete Configuration in Infrastructure mode Choose Manual and then click Next Click the Network tab to see the available Your wireless network is connected successfully This installation If your wireless settings fail, and errorMessage will appear during the installation Printer driver and the installation will beInstalling the Printer Driver For Network Users BRAdmin Light utility For Windows usersClick Install Other Drivers or Utilities on the menu screen BRAdmin Light utility For Mac OS X users Choose Library, Printers, Brother and then UtilitiesNetwork default settings Print the Printer SettingsConsumables Consumables and OptionsOptions Other Information Shipment of the printerCopyright and License LR1447001