STEP 2 Installing the Printer Driver
Windows®
2 Click Wireless Network users.
If you can temporarily connect with a network cable:
Choose I’m able to temporarily connect my device to my access point with a network cable and then click Next. Go to
6.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your access point:
Choose I’m not able to connect my device to my access point with a network cable and then click Next. Go to 7.
Note
For Windows Vista™, when the User Account Control screen appears, click Allow.
® | Wireless Network |
Windows |
|
3 Choose Wireless Setup and Driver Install, and then click Next.
6 Connect the Brother wireless device to your access point using a network cable and click Next. Go to 11.
4
5
Choose Manual and then click Next.
For configuration, it is recommended that you temporarily connect your Brother wireless device (your printer) directly to a free port on your access point, hub or router using a network cable.
7 If you choose This computer has wireless capability., check I am using an access point in infrastructure mode, and then click Next. Go to 10.
30