Brother HL-4070CDW setup guide For network interface cable users

Installing the Printer Driver

Macintosh®

6For network interface cable users

Connecting the printer to your Macintosh® and	5 The Brother software will search for the Brother
installing the driver	printer. During this time the following screen
1 Connect the network interface cable to the	will appear.
printer, and then connect it to a free port on
your hub.

Note

If more than one printer is available, the following list appears. Choose the printer you wish to connect, and then click OK.

2 Turn on the printer power switch.

3 Click Install Printer Driver on the menu screen.

• If there is more than one of the same printer model connected on your network, the Ethernet address (MAC address) will be displayed after the model name.

6 When this screen appears, click OK.

4 Click Network cable users and follow the on-screen instructions. Then, restart your Macintosh®.

For Mac OS® 10.3 or greater users:

Setup is now complete.

7 When this screen appears, click Add.

®	Network
Macintosh
	Wired

For Mac OS® 10.2.4 to 10.2.8 users: Go to step 7.

For Mac OS® 10.3 or greater users:

Go to step 5.

37