For Network Users
3Web Based Management (web browser)
The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).
Note
•The User Name is ‘admin’ and the default password is ‘access’. You can use a web browser to change this password.
•We recommend Microsoft Internet Explorer 6.0® (or higher) or Firefox® 1.0 (or higher) for Windows® and Safari™ 1.0 for Macintosh®. Please also make sure that JavaScript and Cookie are always enabled in whichever browser you use. We recommend you upgrade to Safari™ 1.2 or higher to enable JavaScript. To use a web browser, you must have assigned an IP address to the print server.
1 Type http://printer_ip_address/ into your browser.
(Where printer_ip_address is the IP address or the print server name)
For example: http://192.168.1.2/
(if the printer’s IP address is 192.168.1.2.)
See Chapter 2 of the Network User's Guide.
4Network default settings
To restore all network settings of the internal print server to default, follow the steps below.
1 Press the + or – button to choose LAN. Press OK.
Select ab or OK
LAN
2 Press the + or – button to choose
Factory Reset.
Press OK.
LAN
Factory Reset
3 Press OK again.
Factory Reset
OK?
5Print the Printer Settings Page
The Printer Settings Page lists all the current printer settings, including network settings. To print the printer settings page:
1 Press the + or – button to choose
Machine Info..
Press OK.
Select ab or OK
Machine Info.
2 Press OK again.
Machine Info.
Print Settings
3 Press OK again to print the Printer Settings Page.
52