Brother HL-4070CDW setup guide Configuration in Infrastructure mode

Page 31

Installing the Printer Driver

Windows®

Configuration in Infrastructure mode

Before configuring the wireless settings

Important

Before configuring the wireless settings, confirm your network environment.

The users that can temporary connect with a network cable for configuration:

You do not need to reset the print server and enable the WLAN setting. Go to Configure the wireless settings on this page.

The users that do not have a network cable or cannot temporarily connect the Brother wireless device to your access point:

If you have previously configured the wireless settings of the printer, you must reset the print server back to the default factory settings (see page 52) and enable the WLAN setting from the control panel.See Set the wireless network enable using the contol panel on this page.

Set the wireless network enable using the contol panel

1 Make sure that the printer power switch is on.

2 Press any of the Menu buttons (+, -, OK or Back) to take the printer offline.

Ready

h

Select ab or OK

Machine Info.

3 Press the + or - button to select LAN.

Select ab or OK

LAN

4 Press OK to move to the next menu level.

LAN

Wired

5 Press the + or - button to select WLAN.

LAN

WLAN

6 Press OK to move to select the next level.

WLAN

TCP/IP

7 Press the + or - button to select WLAN Enable.

WLAN

WLAN Enable

8 Press OK to move to select the next level.

WLAN Enable

Off

9 Press the + or - button to select On.

WLAN Enable

On

10 Press OK.

Accepted appears on the second line of the LCD.

WLAN Enable

Accepted

The WLAN setting is enable.

Configure the wireless settings

1 Click Install Printer Driver.

Note

Choose the Install Printer Driver icon for your region.

®	Wireless Network
Windows

29

Image 31

Contents Quick Setup Guide Symbols used in this guide Table of Contents To Use the Printer Safely Safety PrecautionsSafety Precautions Industry Canada Compliance Statement For Canada RegulationsVarning IEC 60825-1 specification 220 to 240 volt model onlyFor Finland and Sweden VaroitusDisconnect device Important For Your SafetyIT power system For Norway only Wiring information for UKGetting Started What is in the box?Control panel Supplied CD-ROM Put the CD-ROM into the CD-ROM drive Setting Up the MachineRemove the packing materials from the printer Load paper in the paper tray Installing the toner cartridgesDo not connect the interface cable yet Print a testSetting your language on the control panel Step Installing the Printer DriverFor USB interface cable users Click Install Printer Driver on the menu screenClick USB cable users Setup is now complete Your computer Installing the driver and connecting the printer toClick Install Printer Driver on the menu For parallel interface cable usersTurn on the printer power switch Click Network cable users For wired network interface cable usersChoose Brother Peer-to-Peer Network For shared network printer users Choose Network Shared Printer, and then click Next Infrastructure Mode For wireless network usersConfirm your network environment Choose Wireless Setup and Driver Install Click Wireless Network usersClick Install Printer Driver LAN Choose Standard Installation, and then click Next Installing the printer driverSet the wireless network enable using the contol panel Configuration in Infrastructure mode„ If you can temporarily connect with a network cable Record the current wireless Select and right click Improper Setup Next For Mac OS 10.2.4 to 10.2.8 users Connecting the printer to your MacintoshInstalling the driver For Mac OS 10.3 or greater users Setup is now completeClick Print Center, then Quit Print Center For Mac OS 10.2.4 to 10.2.8 users Setup is now completeFor network interface cable users Installing the Printer Driver Network Wireless Confirm your network environment Choose I’d like to use SecureEasySetup function of my accessFor Mac OS 10.2.4 to 10.2.8 users Go to step For Mac OS 10.3 or greater users Setup is now complete Configuration in Infrastructure mode Choose Manual and then click Next Click the Network tab to see the available Your wireless network is connected successfully Printer driver and the installation will be This installationIf your wireless settings fail, and error Message will appear during the installationInstalling the Printer Driver Click Install Other Drivers or Utilities on the menu screen BRAdmin Light utility For Windows usersFor Network Users Choose Library, Printers, Brother and then Utilities BRAdmin Light utility For Mac OS X usersPrint the Printer Settings Network default settingsOptions Consumables and OptionsConsumables Shipment of the printer Other InformationCopyright and License LR1447001