STEP 2
Installing the Printer Driver
Windows®
4Select and right click
Wireless Network Connection. Click View Available Wireless Networks.
5You can see the SSID of the wireless printer in the list. Select SETUP and click Connect.
Note
The default Node name is “BRNxxxxxx” for the users that temporary connect with a network cable, or “BRWxxxxxx” for the users that connect without a network cable (where “xxxxxx” are the last six digits of Ethernet address).
12 The wizard will search for wireless networks available from your printer. Choose the access point you wish to associate the printer with, and then click Next.
® | Wireless Network |
Windows |
|
6Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0. to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254).
Note
•"SETUP" is the default SSID of the printer. Do not choose this SSID.
•If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the printer and the access point are within range for wireless communication. Then, click Refresh.
•If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button. Follow the
11 If the list is blank, check if the access point and the printer are powered on, and then click Refresh. Choose the printer you wish to configure, and click Next.
13 If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to 15.
32