Brother HL-4070CDW setup guide Click the Network tab to see the available

STEP 2 Installing the Printer Driver

Macintosh®

8

9

Read the Important Notice. Check the box if you confirm, and then click Next.

You need to temporarily change your computer’s wireless settings. Follow the on- screen instructions. Make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to its original wireless settings, and then click Next.

10 To communicate with the un-configured wireless printer, temporarily change the wireless settings on your computer to match printer’s default settings shown on this screen. Check the box if you confirm, and then click Next.

Note

You can temporarily change the wireless settings on your computer, following the steps below:

1Click the AirPort status icon and select. Open Internet Connect....

Network

Wireless

Macintosh®

Item	Record the current wireless
	computer settings
Communication mode:
(Infrastructure / Ad-hoc)
Channel: (1-14)
Network name:
(SSID / ESSID)
Authentication method:
(Open system / Shared		2	Click the Network tab to see the available
key)
			wireless devices. You can see the Brother
Encryption:
			wireless print server in the Network option.
(None / WEP / WPA /
			Select SETUP.
WPA2-PSK)
Encryption key:

46