Brother DCP-375CW manual Getting started, Memory cards and folder structures

Memory cards and folder structures

Your machine is designed to be compatible with modern digital camera image files and memory cards; however, please read the points below to avoid errors:

„The image file extension must be .JPG (other image file extensions like .JPEG,

.TIF, .GIF and so on will not be recognized).

„Direct PhotoCapture Center™ printing without using a PC must be performed separately from PhotoCapture Center™ operations using the PC. (Simultaneous operation is not available.)

„IBM Microdrive™ is not compatible with the machine.

„The machine can read up to 999 files on a memory card.

„The DPOF file on the memory cards must be in a valid DPOF format. (See DPOF printing on page 34.)

Please be aware of the following:

„When printing an index or image, the PhotoCapture Center™ will print all valid images, even if one or more images have been corrupted. Corrupted images will not be printed.

„Your machine is designed to read memory cards that have been formatted by a digital camera.

When a digital camera formats a memory card it creates a special folder into which it copies image data. If you need to modify the image data stored on a memory card with your PC, we recommend that you do not modify the folder structure created by the digital camera. When saving new or modified image files to the memory card we also recommend you use the same folder your digital camera uses. If the data is not saved to the same folder, the machine may not be able to read the file or print the image.

Printing photos from a memory card

Getting started

Firmly put a memory card into the correct slot.

1 2	3
1 SD, SDHC	5

2Memory Stick™, Memory Stick PRO™

3xD-Picture Card™

Photo Capture key indications:

„Photo Capture light is on, the memory card is correctly inserted.

„Photo Capture light is off, the memory card is not correctly inserted.

„Photo Capture light is blinking, the memory card is being read or written to.

IMPORTANT

DO NOT unplug the power cord or remove the memory card from the media drive (slot) while the machine is reading or writing to the memory card (the

Photo Capture key is blinking). You will lose your data or damage the card.

The machine can only read one device at a time.

31