BT 55 manual Tx At, 1830, Hhmm, Num/Touch/Speed, 19.00

PaperJet 55 user guide – Edition 3 – 10.10.01

To send a fax at a pre-set time (delayed faxing)

Press to confirm. Display shows the time at Start which the fax is due to be sent

AUTOMATIC RX

You can set your PaperJet 55 to send a fax at a specific time in order to take advantage of cheaper call rates or to allow for different time zones.

Place document face down in the document feeder.

If necessary set the Contrast and

Resolution settings.

Function

TX AT 18:30

NOTE

To cancel your pre-set fax transmission, press

the Stop button or remove the document from the document feeder.

If you want to store the document in memory for delayed faxing, see “To fax from memory” on page 19.

FPress until the display shows DELAYED TX

Press the Start button.

Start

Display shows TYPE TIME

HH:MM

If using the 12 hour clock, press the Function button to switch between a for AM and p for PM.

Press the < > buttons to move the cursor.

To change the details of a pre-set fax

You can set a new time and fax number.

Function

FPress until the display shows DELAYED TX

Display shows ALREADY ENTERED

Start

Display shows CHANGE PARAM?

Start

0-9

Start

Enter the time at which you want your fax to be sent, e.g. 18.30.

Display shows TYPE FAX NUMBER and

NUM/TOUCH/SPEED.

You can enter a number using the keypad, one touch or speed dial memories. For one touch, press the appropriate keypad button until the entry appears in the display. For speed dial, press speed dial followed by Code No. Refer to pages 21 to 23.

 

Volume

Start

Start

0-9

Either

Press to display CANCEL SETTING

To confirm. The fax is cancelled and your machine returns to standby.

Or

Display shows TYPE TIME

Enter the new time at which you want your fax to be sent, e.g. 19.00

1 2 3 Enter the number you want.	Start
	Start

Display shows TYPE FAX NUMBER

Press to confirm. Display shows

AUTOMATIC RX

TX AT 19.00

18