BT 55 manual Using your PaperJet, Sending faxes, Setting the contrast and resolution

PaperJet 55 user guide – Edition 3 – 10.10.01

Using your PaperJet 55

Sending faxes

What type of paper you can use

Dimensions:
• width	148mm – 216mm.
• length	216mm – 600mm.
Thickness:
• 60 - 90gsm	max 5 sheets.

•50 -140gsm 1 sheet at a time.

•140 -160gsm when using the document holders.

Do not use

•Torn, crumpled and rolled paper.

•Paper that is too thin (unless in the document holder supplied).

•Wet or moist paper.

•Carbon paper.

•Correction fluid, paperclips and staples.

Inserting documents in the feeder

•Gently insert documents to be faxed (up to 5 pages) face down.

•Adjust the paper feeder width guides to fit.

Setting the contrast and resolution

You can choose different resolution and contrast settings to ensure the best quality when faxing or copying a document.

Setting the contrast and resolution

After inserting the document in the feeder.

Contrast

Contrast

▶Press the Contrast button.

To select the setting you want.

•NORMAL – when the original document is clearly printed.

•DARK – when the original document is light.

•LIGHT – when the original document is dark.

After the fax has been sent, your PaperJet always resets to normal contrast.

Resolution

Resolution

◀Press the Resolution button. To select the setting you want.

•STD (standard) – when the original contains easy to read text.

•FINE – when the original contains small or hard-to-read text or line diagrams.

•FINE and HALF-TONE – when the original contains varying shades of grey or pictures.

NOTE

FINE and HALF-TONE settings take longer to send.

15