BT DF450 manual Adjusting for different-size paper

Page 31

Adjusting for different-size paper

To send a different-size document

Your DF450 can send documents from

148 x 148mm up to 216 x 600mm in size. Adjust the document feeder (if necessary) by moving the side supports.

A4 I

To receive a different-size document

The automatic sheet feeder is pre-set to take A4 (210mm wide) paper, but can be adjusted to take paper 216mm wide also.

START FUNCTION

•Press the FUNCTION button.

•Press the START button until the display reads SIZE:

•Press the ◀ ♣ buttons to select between

SIZE:A4, SIZE: LETTER and SIZE: LEGAL.

A4 - 210mm wide, Legal and letter - 216mm wide.

•Press the START button to confirm your selection.

•Press the STOP button to return the DF450 to standby.

Additional features

To change the automatic sheet feeder cassette to take different-size paper

Your DF450 automatic sheet feeder can hold A4 (210mm wide) or Legal (216mm wide) paper. Adjust the automatic sheet feeder (if necessary) by moving the side supports.

•First remove the paper cover from the front of the automatic sheet feeder.

•Insert a small coin into the small groove just in front of the hinge, this will release the hinge to allow you to pull out the cover.

•Insert a small coin in the groove at the bottom of the automatic sheet feeder to release the black side supports.

L A4

Repeat this action for both sides of the automatic sheet feeder.

28

Image 31

Contents User guide DF450 plain paper fax machineAutomatic document Top viewTop view with the printer cover and control panel open Last TX Control panelThis guide For your records Setting upFollow these steps to get your DF450 ready Plug into the BT socket Fit your DF450 attachments to the main unit Plug the mains lead into a convenient socketTo fit the sent document tray Fully assembled DF450 with attachments fitted Place paper in the automatic sheet feeder Install the print cartridgeClose cover Setting the time and date Connecting a phone or an answering machine to your DF450Setting your name and fax number International codes Name and fax number positionUsing your DF450 Normal dialling Fax is received and printed Which mode is correct for you? Setting the answer modeEither Using a phone or answering machine with your DF450Remote control from an extension Insert the document PollingStoring one-touch and Quickdial numbers and names Press the Function button the display shows FAX SET-UP To store Quickdial numbers and names Press the Function button, display shows FAX SET-UP Fax monitor To change the speaker volumeTo automatically print individual reports Print-outsTo print a list of stored names, numbers and settings Adjusting for different-size paper Changing the size of incoming faxes Adjusting the silence lapse time Adjusting the beep in phone/fax modeConnecting your DF450 to a private switchboard Connecting your DF450 to a direct exchange lineInserting a pause Error correction mode ECM Setting the external buttonSpeed DiagnosticsMaintenance Blank sheet of paper. If the copy is not clear DF450 doesn’t print properly If printing paper is jammed Freefone 0800 Industry standard test sheet Display messages Automatic test procedure No action Operation Transmission report messages Journal report messages Message in Result Interpretation Action Field Engaged tone detected before Repeat transmission Electrical characteristics Technical Specifications and General CharacteristicsTechnical information Voltage drop Index REN Index Page Offices in Europe, North America, Japan and Asia Pacific