BT DF450 manual Control panel, Last TX

Page 4

Control panel

RX MODE RESOL. CONTRAST

		◀	♣
FUNCTION	CLEAR	-	+
QUICKDIAL	LAST TX EXTERNAL		HOLD
A - a	REDIAL	PAUSE	2. TONE

MONITOR START STOP

FUNCTION Press to access the various menus.

CLEAR Deletes incorrect entries.

RX MODE Changes document reception settings.

◀Scrolls through settings available under the function button.

RESOL Selects the resolution for scanning documents to be sent or copied.

-Decreases the speaker volume (after pressing the MONITOR button)

♣Scrolls through settings available under the function button.

CONTRAST Selects the contrast for scanning documents to be sent or copied.

+Increases the speaker volume (after pressing the MONITOR button)

QUICKDIAL Sets the machine for you to dial out numbers stored under the Quickdial function.

A-a	Selects capital or lower case letters
	when storing names in the memory.
LAST TX	Prints a status report on last fax sent.

REDIAL Redials the last number.

EXTERNAL (If connected to a switchboard): can be programmed to give you an outside line, ready to dial.

PAUSE Inserts a pause in a number.

HOLD Puts a telephone call on hold.

2.TONE Use this key to detect secondary dial tone on certain PBXs. When this function is activated, a colon will appear in the display.

MONITOR Allows you to dial a telephone number without lifting the handset. You can hear the line tone and dialling tone through the internal loudspeaker.

A telephone will need to be connected for you to be able to hold a conversation.

START Use to send or copy a document. Confirms the choices and selections you make on the FUNCTION button.

STOP Stops any current operation; resets the machine if there is an operating error.

Image 4

Contents DF450 plain paper fax machine User guideTop view Automatic documentTop view with the printer cover and control panel open Control panel Last TXThis guide For your records Setting upFollow these steps to get your DF450 ready Plug into the BT socket Plug the mains lead into a convenient socket Fit your DF450 attachments to the main unitTo fit the sent document tray Fully assembled DF450 with attachments fitted Install the print cartridge Place paper in the automatic sheet feederClose cover Connecting a phone or an answering machine to your DF450 Setting the time and dateSetting your name and fax number Name and fax number position International codesUsing your DF450 Normal dialling Fax is received and printed Setting the answer mode Which mode is correct for you?Using a phone or answering machine with your DF450 EitherRemote control from an extension Polling Insert the documentStoring one-touch and Quickdial numbers and names Press the Function button the display shows FAX SET-UP To store Quickdial numbers and names Press the Function button, display shows FAX SET-UP To change the speaker volume Fax monitorPrint-outs To automatically print individual reportsTo print a list of stored names, numbers and settings Adjusting for different-size paper Changing the size of incoming faxes Adjusting the beep in phone/fax mode Adjusting the silence lapse timeConnecting your DF450 to a private switchboard Connecting your DF450 to a direct exchange lineInserting a pause Setting the external button Error correction mode ECMDiagnostics SpeedMaintenance Blank sheet of paper. If the copy is not clear DF450 doesn’t print properly If printing paper is jammed Freefone 0800 Industry standard test sheet Display messages Automatic test procedure No action Operation Transmission report messages Journal report messages Message in Result Interpretation Action Field Engaged tone detected before Repeat transmission Technical Specifications and General Characteristics Electrical characteristicsTechnical information Voltage drop Index REN Index Page Offices in Europe, North America, Japan and Asia Pacific