BT DF450 manual Display messages

Page 43

Help

Display messages

MESSAGE	INTERPRETATION	ACTION
DOC. IN MEM.	Incoming documents have	Check nature of problem
	been stored in the memory	(no paper or ink) and remedy.
	because there was a problem
	during reception which
	prevented immediate printing.

REC. IN MEM.	Reception continues with
	storage in memory because
	of paper error or ink out.
OUT OF INK	No ink in cartridge.
ADD PAPER!	No paper in the sheet feeder.
CHECK PRINT HEAD	Print head is not present or
	some print nozzles are
	clogged so print quality is
	affected.
REMOVE DOCUMENT	Document scanning
PRESS STOP	interrupted.
PRINT. COVER OPEN	The printer cover is open or
	not correctly closed.
KEYBOARD OPEN	Console is open or not
	correctly closed.
PAPER ERROR	Paper jam.
PRESS STOP
SYSTEM ERROR nn	A fatal system error has been
	detected.
CHECK PRINT OUT	Print head has just been
1=EXIT 0=REPEAT	replaced.

Check nature of problem and remedy.

Change cartridge.

Insert paper in sheet feeder.

Check presence of print head. Replace print head.

Remove document by pressing STOP and re-insert correctly.

Close cover.

Remove document and close console.

Check and insert paper correctly – press STOP.

Switch off fax and switch it on again. If problem persists, call Customer Service.

Check print quality and select 1 or 0.

40

Image 43

Contents User guide DF450 plain paper fax machineAutomatic document Top viewTop view with the printer cover and control panel open Last TX Control panelThis guide For your records Setting upFollow these steps to get your DF450 ready Plug into the BT socket Fit your DF450 attachments to the main unit Plug the mains lead into a convenient socketTo fit the sent document tray Fully assembled DF450 with attachments fitted Place paper in the automatic sheet feeder Install the print cartridgeClose cover Setting the time and date Connecting a phone or an answering machine to your DF450Setting your name and fax number International codes Name and fax number positionUsing your DF450 Normal dialling Fax is received and printed Which mode is correct for you? Setting the answer modeEither Using a phone or answering machine with your DF450Remote control from an extension Insert the document PollingStoring one-touch and Quickdial numbers and names Press the Function button the display shows FAX SET-UP To store Quickdial numbers and names Press the Function button, display shows FAX SET-UP Fax monitor To change the speaker volumeTo automatically print individual reports Print-outsTo print a list of stored names, numbers and settings Adjusting for different-size paper Changing the size of incoming faxes Adjusting the silence lapse time Adjusting the beep in phone/fax modeConnecting your DF450 to a private switchboard Connecting your DF450 to a direct exchange lineInserting a pause Error correction mode ECM Setting the external buttonSpeed DiagnosticsMaintenance Blank sheet of paper. If the copy is not clear DF450 doesn’t print properly If printing paper is jammed Freefone 0800 Industry standard test sheet Display messages Automatic test procedure No action Operation Transmission report messages Journal report messages Message in Result Interpretation Action Field Engaged tone detected before Repeat transmission Electrical characteristics Technical Specifications and General CharacteristicsTechnical information Voltage drop Index REN Index Page Offices in Europe, North America, Japan and Asia Pacific