Konica Minolta OKIFAX 5950 manual User Functions, AutoTray Switch User Function

Page 50

User Functions

These three user functions are specific to Network Printing.

∙Auto Tray Switch (User Function 80)

∙Paper Size Check (User Function 81)

∙LAN Print T.O. (User Function 82)

AutoTray Switch

User Function 80

Settings are: ON or OFF

Default is: OFF.

When Auto Tray Switch is set to ON, your fax machine will use paper from another tray when paper runs out in one tray.

!The optional second tray must be installed for this to function.

The same size paper must be installed in both trays.

Paper Size Check

User Function 81

Settings are: ON or OFF

Default is: ON.

Set to ON

If Paper Size Check is set to ON, an alarm displays when the paper size specified from the PC does not match the paper size specified for the tray of the fax machine.

When this alarm is displayed, put the correct size of paper in the specified tray. Printing begins when the tray is closed.

After printing,

∙set the same paper as configured for the tray or

∙change the tray configuration to the correct paper size.

Set to OFF

If Paper Size Check is set to OFF, printing occurs even if the PC-specified and Paper Tray paper sizes don’t match.

LAN PrintT.O.

User Function 82

It is impossible to judge whether printing data is not being transmitted due to network delay or the end of the data stream. This time-out configuration allows the device to cancel a print job when no printing data can be found after a specified time has elapsed since the last data was submitted.

Do not change the default configuration unless it is absolutely necessary.

Settings are: 5 sec., 30 sec., 5 min.

Default Setting is: 30 sec.

48 Konica FAX 9930

Page 49 Page 51
Image 50
Page 49 Page 51
Contents FAX Trademark Information Information Provided OverviewOperation Overview End User General ConditionsInternet Fax Transmission General Information Host Name Smtp Server Address / NameDNS Server’s IP Address Mail AddressPOP Server Address / Name POP Server PasswordAccessing Network Settings From the Fax Machine Front Panel POP Server User NameList of Settings Internet Fax Information ProvidedComponents of an Internet Fax Network Print DriverMail Helpful Hints T.37What Your T.37 Internet Fax Machine Can Do Tiff attachmentsInternet Fax Backup / Archive Network ScanPstn Faxing vs. Internet Faxing Mail Addresses vs. Pstn Phone NumbersOperation Overview InstallationSetup LAN Topologies and Operating SystemsManagement Protocols Network Print ProtocolsInternet Fax Protocols Printing the Configuration Report Set Up on a NetworkIdentifying Current Settings Accessing Settings Settings Stored on the Fax MachineUsing the Button on the Network Card List of User Functions Network Settings Set to on AutoTray Switch User FunctionPaper Size Check User Function Set to OFFPOP Interval User Function To correct this errorTo prevent this error Delete POP MessageHeader Print Time Between GMTText Print Ifax Sender ID Coding ModeExtra Fine Mode Domain NameMessage Disposition Notification MDN ExampleDomain Name Restrictions 37Internet FAX User’s Guide Network Settings Example MDN MessageDhcp Server RestrictionsPOP Server Name DNS P .SRVADDRESS FAX E-mail AddressDSN Delivery Status Notification NIC InitializeChanging Settings Settings Changed Only by Using the WebNetWare NetBEUI EtherTalk Printer StatusNetwork Status Smtp Port Number Smtp TransmitSmtp Receive POP Port NumberProgramming e-mail Addresses ProcedureCustomization Confirming e-mail Address Programming Mail Address RestrictionsDifferences Using Internet FaxSending a Document Stopping a TransmissionHow to Send a Document Sending to a Non-Programmed E-mailTiff Format Limitations and SuggestionsReceiving Internet Faxes Viewing Tiff FilesMultiple Messages Automatic ReceptionSingle Message Text Print onReceiving e-mails Body Text ResolutionReceiving Tiff files CompressionYour fax machine cannot print Your fax machine may not be able to printMails to a Fax Number Gateway Services ForwardingFaxes to an e-mail Address How it worksTelephone Number Restrictions ExampleImage Restrictions Mail Address FormatDomain Name Restrictions How it WorksDNS Server Mail Server Settings for E-mail-to-FAX Gateway ServiceNetwork Setup Add a PTR Record Install the Fax Machine Add a RecordAddress a record Pointer PTR RecordMail Server With fax, the server does not receive mail to fax.abc.com Mail Forwarding ProcessImage Resolution Network ScannerOperating Systems Network PrintingPrinting Documents Printing on TransparenciesWindows Windows NT 4.0 and WindowsWindows 95/98 Also known as CD Setup Utilities ConfigurationConfiguring from Network Utilities SettingsUser Functions Banner Output End User Problem SolvingNetwork Administrator Smtp Protocol Error Codes CodesPOP3 Communication Errors Display shows message Option Board Error Transmission TroubleshootingTransmission fails a communication error occurs Tiff file I sent does not print out at the receiver Reception TroubleshootingReception fails a communication error occurs Reception does not startSame mail prints repeatedly Mail-to-Fax Troubleshooting Internet Fax refuses to receive dataWhen I scan documents, my fax machine sender ID is included Try entering the IP address Printing Troubleshooting Konica FAX

OKIFAX 5950 specifications

The Konica Minolta OKIFAX 5950 is a versatile and efficient multifunction fax machine that caters to the needs of small to medium-sized businesses. Known for its reliable performance and high-quality output, the OKIFAX 5950 integrates advanced technology to streamline faxing while maintaining user-friendly operations.

One of the standout features of the OKIFAX 5950 is its high-speed fax transmission, capable of sending documents at a rate of up to 3 seconds per page. This efficiency helps businesses manage time effectively, particularly when dealing with important documents that require immediate attention. The device also supports both Super G3 and G3 fax standards, ensuring compatibility with various telecommunications systems.

Another key characteristic of the OKIFAX 5950 is its extensive memory capacity. With the ability to store up to 600 pages of received faxes, this machine significantly reduces the risk of losing important information during busy periods or when paper runs out. Additionally, the unit features a dual-access function, allowing users to send and receive faxes simultaneously without delays.

The OKIFAX 5950 uses advanced thermal transfer technology, which delivers crisp and professional output. The machine also facilitates easy printing of documents with a print resolution of up to 600 x 600 dpi, ensuring clarity in all communications. Moreover, the device supports different paper sizes, including letter, legal, and A4, which enhances its versatility for various office tasks.

Ease of use is another hallmark of the OKIFAX 5950. Its user-friendly control panel, equipped with a backlit display, allows for straightforward navigation through various functions. The machine includes an auto-dialing feature, storing up to 200 contacts, thus simplifying the process of sending faxes to frequently contacted numbers.

Additional features include a built-in answering machine and a telephone handset, making the OKIFAX 5950 a comprehensive communication solution for businesses. The device also supports eco-friendly practices, with energy-saving modes and options for reduced power consumption.

In summary, the Konica Minolta OKIFAX 5950 combines speed, efficiency, and versatility, making it an ideal choice for businesses looking to enhance their fax communication. With its range of advanced features and user-friendly design, this multifunction fax machine stands out as a reliable asset in any office environment.
Top Page Image Contents