Gilson 215 manual Rack Setup, Code 200-Series Code 500-Series Racks

Installation

Rack Setup

The Quad-Z 215 Liquid Handler is equipped to locate Code 20-, 30-, 200-, and 500-series racks. See Appendix B for a list of racks available for the liquid handler.

Depending on the racks you’re using, refer to the appropriate procedures on the following pages.

Code 200-Series and

Code 500-Series Racks

If all your racks are Code 200-series or Code 500- series racks, place them directly onto the locator plate:

1Orient the rack so that the code number (for example, 200) is facing forward.

2Fit the rack on the locator plate so that the slots and holes on the underside of the rack align with the pins on the locator plate.

2

Rack Setup

2-11