Gilson 215 manual Oabcd

Appendix		C
N	I	Reads the liquid detector output. Returns “a,b,c,d” where:
		a - leftmost probe (probe A)
		b - probe B
		c - probe C
		d - probe D
		For each status, you’ll see A for air or L for liquid.
Oabcd	B	Sets each probe speed value (in µm/s) where:
		a = speed of probe A
		b = speed of probe B
		c = speed of probe C
		d = speed of probe D
		If the value is not specified, the probe speed value will
		remain the same.
		The default speed is 125000 µm/s.
O	I	Reads each probe speed value (in µm/s). Returns “a,b,c,d”
		where:
		a = speed of probe A
		b = speed of probe B
		c = speed of probe C
		d = speed of probe D
P	I	Reads X and Y encoder positions in integral units of 0.1 mm.
q	I	Reads probe range values in the X direction for each probe
		(a–d) in sequence where:
		a = minimum X value/maximum X value
		b = minimum X value/maximum X value
		c = minimum X value/maximum X value
		d = minimum X value/maximum X value
		The range is displayed in integral units of 0.1 mm. The
		values are based on the current probe pitch. Changing the
		pitch will alter the ranges.

GSIOC Commands

C-7