Gilson 215 manual Unpacking

Introduction

Unpacking

The Quad-Z 215 Liquid Handler is delivered with all major components already assembled except for auxiliary parts such as the Z-arm, probe, racks, tubing, etc. Keep the original container and packing assembly in case the liquid handler must be returned to the factory.

The Quad-Z 215 Liquid Handler and its components are shipped in two containers:

•One container holds the auxiliary items, such as locator plate, tubing, probes, rinse station, Z-arm, and any other accessories you may have ordered with your system.

•The other container holds the Quad-Z 215 Liquid Handler.

To remove the liquid handler from its container:

1Cut the metal strapping.

2Lift the outer box off and away from the liquid handler.

3Lift the inner box off and away from the liquid handler.

4Lift the unit off its base platform and place it on a lab bench or cart. Gilson recommends that two people lift the liquid handler off the base of the packing container. To lift the liquid handler:

a)Using the two cutouts for hand holds, place a hand at the base of the packing container.

b)Grip the liquid handler under the base plate.

c)Lift the unit up and out of the foam packing material. The side containing the electronics cabinet is the heavier side.

Do not attempt to lift the instrument from the Y-arm (the horizontal arm). Always lift the instrument from its base.

1

Unpacking

1-3