Linksys FENSK05 manual Copyright & Trademarks

Page 2

COPYRIGHT & TRADEMARKS

Copyright © 1999 Linksys, All Rights Reserved. Instant EtherFast is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every EtherFast 10/100 Network In a Box is free from physical defects in material and workmanship under normal use starting at the date of purchase. If the network cards or cables prove defective during this lifetime warranty period or if the hub proves defective during this 5-year limited warranty period, call Linksys Customer Support in order to obtain a Return Authorization number. Warranty is for repair or replacement only. Linksys does not issue any refunds. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND BAR CODE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE AND BAR CODE. When returning a product, mark the Return Authorization number clearly on the outside of the package and include your original proof of purchase and bar code.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. Linksys makes no war- ranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documenta- tion and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its prod- ucts, software, or documentation without obligation to notify any individual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

FCC STATEMENT

This equipment has been tested and found to comply with the lim- its for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ener- gy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equip- ment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or device

Connect the equipment to an outlet other than the receiver’s

Consult a dealer or an experienced radio/TV technician for assistance

902

Image 2
Contents 10/100 Network A Box Copyright & Trademarks Contents Introduction Package Contents About Plug-and-Play PCI Technology Menu Changes No Changes AllowedJumper Changes Hardware Setup Before You BeginUsing the Wake-On-LAN Feature Installing the HardwareInstalling the Cabling Expanding Your Network in the Future Preparing to Install the Software Windows 98 Setup Windows Preparing Windows 98 For Use on a Network -- Step Preparing Windows 98 for Use on a Network --Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows 95 Setup Windows 95 Version a Setup Windows 95 Version B Setup Preparing Windows 95 For Use on a Network -- Step Preparing Windows 95 for Use on a Network -- Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows NT 4.0 Setup Windows NT Windows NT Windows NT Installing the EtherFast Network Driver in NT Windows NT Windows NT Windows for Workgroups Setup Windows For Workgroups Novell NetWare Setup AinstallCd c\diag diag NetWare Novell Client32 Setup for Windows 95 NetWare NetWare Installing a 3.12 Server Bind a protocol to the driver. For example Installing a 4.x Server Installing a 5.0 Server \NETWARE\SERVER\5.0 then press EnterLoad LNE100TX FRAME=ETHERNETII TP Turbo What is Wake-On-Lan? Wake-On-LANMotherboard Support Setting Up Your EtherFast LAN Card for Wake- On-LAN Use Testing Link Change Sending a Magic PacketClient for Microsoft Networks Windows LogonAppendix Novell 3.x Client Setup for Windows 98 or Twisted-Pair Cabling Cabling Rules Meters 328 feetTroubleshooting Troubleshooting Hints for Windows 95Solution Solutions Running the Card’s Diagnostics Cd a\diag diagAppendix Installing Windows Network Components from Scratch Starting Over WindowsAppendix Appendix Appendix Manually Installing Network Components Windows Click on Start, Settings, then Control PanelNetBEUI Client for Netware NetworksIPX/SPX-compatible Protocol LEDs LNE100TX EtherFast 10/100 Network CardSpecifications Web FTP Site Customer SupportCustomer Support Fax Bulletin Board T p / / w w w. l i n k s y s . c o m