NetWare
Installing a 3.12 Server
The EtherFast Card network driver is installed during the NetWare installation process. During the setup you may want to refer to your NetWare 386 v3.12 Installation Manual for help. You will also be using ConfigDisk during the setup.
1.Make a directory in the DOS partition of your file server called LNE100.
2.Copy the following files from the card’s disk 2 to your file server's new LNE100 directory:
a:\netware\server\3.12\NBI31X.NLM
a:\netware\server\3.12\MSM31X.NLM
a:\netware\server\3.12\ETHERTSM.NLM
a:\netware\server\3.12\LNE100TX.LAN
3.Following the Load LAN Driver Module instructions in your Novell NetWare 386 v3.12manual, start NetWare and configure the server if you haven’t already.
4.Load the LAN drivers above using the LOAD com- mand.
If the LAN driver is not located in the default directory, specify the file's path on the command line. The LOAD command prompts you for the configuration parameters if they are not supplied on the command line.
You can save the LOAD command line parameters in a file with the name AUTOEXEC.NCF so they execute automatically when the server starts. See the Novell NetWare 386 v3.12 Installation Manual for details on how to create the AUTOEXEC.NCF file.
41