Linksys FENSK05 manual Solutions

Appendix

Solutions

Make sure that the cables are connected correctly. Make sure you are getting Link or Activity lights on both the EtherFast Card and your hub. Try changing to a new cable that you know is working.

Your workgroup name may be different from other com- puters on your network. Make sure each PC on the net- work is using the same workgroup name.

Problem 7: In Network Neighborhood, you can see all other computers on the network but not yourself, and all other computers can see each other and not your com- puter.

Solutions

You may have not have enabled File and Printer Sharing. To do so, go to Windows 95 or 98 installation.

The network card might not be setup properly. Try rein- stalling the card. Skip to page 60.

Problem 8: Network Neighborhood is Empty.

Solutions

Verify that your Microsoft Client is installed. See the Windows 95 or 98 setup instructions in this guide for directions.

Problem 9: You receive DHCP Errors in Windows.

Solutions

Remove the TCP/IP component from Windows’ net- working. To do this, click on Start, Settings, Control Panel, then double-click on Network. Click once on the component entry with the word TCP/IP in it, then click on the Remove button. Click OK when finished. If the problem persists, try running the diagnostics on the fol- lowing page.

57