Linksys FENSK05 manual Starting Over Windows, Installing Windows Network Components from Scratch

Page 62

Appendix

Starting Over in

Windows

Installing Windows Network Components from Scratch

If you experience installation difficulties, you may need to re-install all of the Windows networking components from scratch. The instructions below explain how to give your PC a clean sweep so that you can start the EtherFast Card’s software installation over.

1.At the desktop click on the Start Button, highlight Settings, click on Control Panel.

2.Double-click on the Network Icon.

3.Look at the box with the text that reads, The follow- ing network components are installed.

4.If the box has a component called Dial-Up Adapter, skip forward to step 6. If it doesn’t, go to step 5.

5.Remove any instance on the name Linksys in the box. This includes IPS/SPX…Linksys, NetBEUI…Linksys, and TCP/IP…Linksys. Also remove Client for Microsoft Networks, Client for Netware Networks, and File and Printer Sharing for Microsoft Networks.

60

Image 62

Contents 10/100 Network A Box Copyright & Trademarks Contents Introduction Package Contents About Plug-and-Play PCI Technology Menu Changes No Changes AllowedJumper Changes Hardware Setup Before You BeginUsing the Wake-On-LAN Feature Installing the HardwareInstalling the Cabling Expanding Your Network in the Future Preparing to Install the Software Windows 98 Setup Windows Preparing Windows 98 For Use on a Network -- Step Preparing Windows 98 for Use on a Network --Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows 95 Setup Windows 95 Version a Setup Windows 95 Version B Setup Preparing Windows 95 For Use on a Network -- Step Preparing Windows 95 for Use on a Network -- Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows NT 4.0 Setup Windows NT Windows NT Windows NT Installing the EtherFast Network Driver in NT Windows NT Windows NT Windows for Workgroups Setup Windows For Workgroups Novell NetWare Setup AinstallCd c\diag diag NetWare Novell Client32 Setup for Windows 95 NetWare NetWare Installing a 3.12 Server Bind a protocol to the driver. For example Installing a 4.x Server Installing a 5.0 Server \NETWARE\SERVER\5.0 then press EnterLoad LNE100TX FRAME=ETHERNETII TP Turbo What is Wake-On-Lan? Wake-On-LANMotherboard Support Setting Up Your EtherFast LAN Card for Wake- On-LAN Use Testing Link Change Sending a Magic PacketClient for Microsoft Networks Windows LogonAppendix Novell 3.x Client Setup for Windows 98 or Twisted-Pair Cabling Cabling Rules Meters 328 feetTroubleshooting Troubleshooting Hints for Windows 95Solution Solutions Running the Card’s Diagnostics Cd a\diag diagAppendix Installing Windows Network Components from Scratch Starting Over WindowsAppendix Appendix Appendix Manually Installing Network Components Windows Click on Start, Settings, then Control PanelNetBEUI Client for Netware NetworksIPX/SPX-compatible Protocol LEDs LNE100TX EtherFast 10/100 Network CardSpecifications Web FTP Site Customer SupportCustomer Support Fax Bulletin Board T p / / w w w. l i n k s y s . c o m