NetWare
Installing a 5.0 Server
Follow these directions to set up a Novell NetWare 5.0 server.
1.Insert the EtherFast 10/100 LAN Card program disk into drive A.
2.At the NetWare prompt, run the INSTALL.NLM pro- gram by typing:
<server name>: LOAD INSTALL and press Enter.
3.Select the Maintenance/Selective Install option and press Enter.
4.Select LAN Driver Options and press Enter.
5.Press the Ins key to specify other drivers that you wish to install.
6.Press F3 and specify the driver path:
A:\NETWARE\SERVER\5.0 then press Enter.
7.The LNE100TX.LAN driver should appear in the Select a LAN Driver field. Choose this driver to start the driver loading and binding procedure. This will allow you to load and bind all 4 frame types supported by NetWare.
8.Add the LOAD and BIND statements required to the server's AUTOEXEC.NCF file. This instructs the server to load the LAN driver automatically each time the server starts up.
44