Windows For Workgroups
Windows for Workgroups Setup
After installing the EtherFast card hardware in you com- puter, follow the instructions below to install the EtherFast Card's Windows for Workgroups network driver from the card's software disk.
Before attempting the installation, you should have your original Windows for Workgroups disks handy.
1.Locate the Program Manager. Click on Window. Select Network and open the Network group. Double- click on the Network Setup icon.
2.Click on the Networks button. Choose Install Microsoft Windows Network, then click OK.
3.In the Network Setup window, click on the Drivers button, followed by Add Adapter.
4.Choose the first option in the list: Unlisted or Updated Network Adapter. Click OK.
When asked to supply a driver disk, insert the first EtherFast disk into drive A and type a:\wfw311 into the box on your screen. Click OK.
Linksys LNE100TX Fast Ethernet Adapter will appear in the Network Adapter box. Click OK, followed by Close.
5.When the Network Setup window reappears, click on the Sharing button.
33