NetWare
Installing a 4.x Server
The EtherFast Card network driver is installed during the NetWare installation process. During the setup you may want to refer to your NetWare 386 v4.0 installation Manual for help. You will also be using ConfigDisk during the setup.
At the NetWare prompt (indicated by the server name), run the INSTALL.NLM program by typing load install.
1.Select Maintenance/Selective Install and press Enter.
2.Select LAN Driver Options and press Enter.
3.Press the Insert or Ins key on your keyboard to insert a new driver. Put the EtherFast card’s program disk 2 into drive A or B.
4.Press F3 and specify the driver path. If the EtherFast Card disk is in drive A:, for example, type a:\netware\server\4.x and press Enter. The program will locate the EtherFast Card’s LNE100TX.LAN and LNE100TX.LDI files on the disk.
5.The LNE100TX.LAN driver will appear as an option in the Select a LAN Driver field. Choose this driver to start the loading and binding procedure.
6.Add the LOAD and BIND statements to your server's AUTOEXEC.NCF file so that the LAN driver loads automatically each time your server is started up.
The load and binding are complete. The server is ready to be used.
43