Appendix
Novell 3.x Client Setup for Windows 98 or 95
The instructions below explain how to set up the regular Novell NetWare 3.x client for use on a Windows 98 or 95 PC. If you are installing NetWare’s Client32 software instead, follow the instructions on page 38.
1.Follow the Windows 95 setup instructions or the Windows 98 setup instructions.
2.Start up Windows 95 or 98. Click on Start, Settings, then Control Panel.
3.In the Primary Logon Box, choose Client for NetWare Networks.
4.Under the The following network components are installed box, highlight Client for NetWare Networks and click on the Properties button.
5.The Client for NetWare Networks Properties window appears. Under the General tab, enter the name of your network’s Preferred Server. Assign the First Network Drive Letter; the default is F. Make sure the Enable logon script processing is checked.
6.Click OK. Click on the Access Control tab. Make sure the
7.When you’re done, click OK to restart your comput- er. The NetWare portion of your Windows setup is com- plete.
52