Linksys FENSK05 manual Windows NT 4.0 Setup

Page 28

Windows NT

Windows NT 4.0 Setup

The instructions that follow explain how to set up an NT 4.0 server/workstation.

You should have your original Windows NT CD-ROM handy during the installation, as you might be asked to supply it. Always contact your network administrator or consult your NT documentation if you have questions.

To install the network driver for an NT 4.0 Server or Workstation:

1.Start up your computer and Windows NT 4.0. Enter your username and password if asked to do so.

2.Click on Start, Settings, Control Panel, and then double-click on the Network icon.

3.If you have not installed Windows NT networking on your computer before, a message appears that reads: Windows NT Networking is not installed. Do you want to install it now?

•If you see this message, click on Yes to install NT net- working along with the EtherFast Card's network driver, and continue with step 1 on the next page.

•If you don't see this message, NT networking is already installed. Continue with step 1 on page 30. Installing NT Networking and the EtherFast Network Driver

26

Image 28

Contents 10/100 Network A Box Copyright & Trademarks Contents Introduction Package Contents About Plug-and-Play PCI Technology Jumper Changes No Changes AllowedMenu Changes Hardware Setup Before You BeginUsing the Wake-On-LAN Feature Installing the HardwareInstalling the Cabling Expanding Your Network in the Future Preparing to Install the Software Windows 98 Setup Windows Preparing Windows 98 For Use on a Network -- Step Preparing Windows 98 for Use on a Network --Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows 95 Setup Windows 95 Version a Setup Windows 95 Version B Setup Preparing Windows 95 For Use on a Network -- Step Preparing Windows 95 for Use on a Network -- Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows NT 4.0 Setup Windows NT Windows NT Windows NT Installing the EtherFast Network Driver in NT Windows NT Windows NT Windows for Workgroups Setup Windows For Workgroups Novell NetWare Setup AinstallCd c\diag diag NetWare Novell Client32 Setup for Windows 95 NetWare NetWare Installing a 3.12 Server Bind a protocol to the driver. For example Installing a 4.x Server Installing a 5.0 Server \NETWARE\SERVER\5.0 then press EnterLoad LNE100TX FRAME=ETHERNETII TP Turbo What is Wake-On-Lan? Wake-On-LANMotherboard Support Setting Up Your EtherFast LAN Card for Wake- On-LAN Use Testing Link Change Sending a Magic PacketClient for Microsoft Networks Windows LogonAppendix Novell 3.x Client Setup for Windows 98 or Twisted-Pair Cabling Cabling Rules Meters 328 feetTroubleshooting Troubleshooting Hints for Windows 95Solution Solutions Running the Card’s Diagnostics Cd a\diag diagAppendix Installing Windows Network Components from Scratch Starting Over WindowsAppendix Appendix Appendix Manually Installing Network Components Windows Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol Client for Netware NetworksNetBEUI LEDs LNE100TX EtherFast 10/100 Network CardSpecifications Customer Support Fax Bulletin Board Customer SupportWeb FTP Site T p / / w w w. l i n k s y s . c o m