Linksys FENSK05 manual Preparing Windows 98 for Use on a Network --Step

Page 16

Windows 98

Preparing Windows 98 for Use on a Network --Step 2

Before enabling File and Printer Sharing, you should prepare your computer to be used with any file servers that may be on the network.

Using the Card with a NetWare File Server 3.11 or 3.12

Click on My Computer, Control Panel, and Network. Change the Network Logon to Client for NetWare Network. Next, double-click on the Client for NetWare Networks. Put your server's name in the Preferred Server box. Check the Enable Logon Script Processing box. Click on OK and restart your PC. For detailed instructions, please see page 52 of the Appendix.

Using the Card with a Windows NT File Server

Click on My Computer, Control Panel, and Network. Change the Primary Logon to Client for Microsoft Network. Double-click on the Client for Microsoft Networks. Check the Log into Windows NT domain box. Put your NT domain name in the Windows NT domain area. Click on OK and restart your PC. For detailed instructions, please see page 50 of the Appendix.

Continue with the installation instructions that appear on your screen, if any. When you're finished, restart your computer. The instructions on the next page explain how to enable file and printer sharing in Windows 98 so that your computer can be accessed by others and vice-versa.

Note: For setup of TCP/IP protocol, refer to your Microsoft Windows documentation or contact your system administrator.

14

Image 16

Contents 10/100 Network A Box Copyright & Trademarks Contents Introduction Package Contents About Plug-and-Play PCI Technology Jumper Changes No Changes AllowedMenu Changes Hardware Setup Before You BeginUsing the Wake-On-LAN Feature Installing the HardwareInstalling the Cabling Expanding Your Network in the Future Preparing to Install the Software Windows 98 Setup Windows Preparing Windows 98 For Use on a Network -- Step Preparing Windows 98 for Use on a Network --Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows 95 Setup Windows 95 Version a Setup Windows 95 Version B Setup Preparing Windows 95 For Use on a Network -- Step Preparing Windows 95 for Use on a Network -- Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows NT 4.0 Setup Windows NT Windows NT Windows NT Installing the EtherFast Network Driver in NT Windows NT Windows NT Windows for Workgroups Setup Windows For Workgroups Novell NetWare Setup AinstallCd c\diag diag NetWare Novell Client32 Setup for Windows 95 NetWare NetWare Installing a 3.12 Server Bind a protocol to the driver. For example Installing a 4.x Server Installing a 5.0 Server \NETWARE\SERVER\5.0 then press EnterLoad LNE100TX FRAME=ETHERNETII TP Turbo What is Wake-On-Lan? Wake-On-LANMotherboard Support Setting Up Your EtherFast LAN Card for Wake- On-LAN Use Testing Link Change Sending a Magic PacketClient for Microsoft Networks Windows LogonAppendix Novell 3.x Client Setup for Windows 98 or Twisted-Pair Cabling Cabling Rules Meters 328 feetTroubleshooting Troubleshooting Hints for Windows 95Solution Solutions Running the Card’s Diagnostics Cd a\diag diagAppendix Installing Windows Network Components from Scratch Starting Over WindowsAppendix Appendix Appendix Manually Installing Network Components Windows Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol Client for Netware NetworksNetBEUI LEDs LNE100TX EtherFast 10/100 Network CardSpecifications Customer Support Fax Bulletin Board Customer SupportWeb FTP Site T p / / w w w. l i n k s y s . c o m