Linksys FENSK05 manual Novell Client32 Setup for Windows 95

Page 40

NetWare

Novell Client32 Setup for Windows 95 and 98

Client32 drivers are required for connecting to a 4.x or 5.0 server while in Windows 95 only.

If you are using Windows 98, you must obtain the latest version of Client32. The installation is very similar to that of Windows 95 OSR2. Follow the OSR2 (version

B)instructions below. When asked for the location of the drivers, specify a:\client32 on the EtherFast 10/100 LAN Card program diskette.

Before you begin, obtain the Client32 disks or CD- ROM from Novell. You may be able to download a copy of the disk(s) from Novell's BBS or web site.

Follow the directions below to install and/or configure your Client32 drivers for use with the card.

1.If Novell's Client32 drivers are already installed on your computer, do the following to remove any network adapter settings that may conflict with the EtherFast card: Click on Start, Settings, Control Panel, and dou- ble-click on the Network icon. If you see any network adapters listed in the box, remove them. Finally, remove all floppy disks from your computer and reboot.

2.If you have not installed Novell's Client32 drivers onto your computer, run the Client32 SETUP.EXE pro- gram. When the program appears, click Yes, followed by Start to begin the installation. When Setup is fin- ished copying files to your system, reboot.

3.After Windows is up and running, remove all floppy disks from your computer. Insert the EtherFast card into your PC.

38

Image 40

Contents 10/100 Network A Box Copyright & Trademarks Contents Introduction Package Contents About Plug-and-Play PCI Technology Jumper Changes No Changes AllowedMenu Changes Hardware Setup Before You BeginUsing the Wake-On-LAN Feature Installing the HardwareInstalling the Cabling Expanding Your Network in the Future Preparing to Install the Software Windows 98 Setup Windows Preparing Windows 98 For Use on a Network -- Step Preparing Windows 98 for Use on a Network --Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows 95 Setup Windows 95 Version a Setup Windows 95 Version B Setup Preparing Windows 95 For Use on a Network -- Step Preparing Windows 95 for Use on a Network -- Step Preparing to Use File and Printer Sharing Enabling File Sharing How To Share Printers Windows NT 4.0 Setup Windows NT Windows NT Windows NT Installing the EtherFast Network Driver in NT Windows NT Windows NT Windows for Workgroups Setup Windows For Workgroups Novell NetWare Setup AinstallCd c\diag diag NetWare Novell Client32 Setup for Windows 95 NetWare NetWare Installing a 3.12 Server Bind a protocol to the driver. For example Installing a 4.x Server Installing a 5.0 Server \NETWARE\SERVER\5.0 then press EnterLoad LNE100TX FRAME=ETHERNETII TP Turbo What is Wake-On-Lan? Wake-On-LANMotherboard Support Setting Up Your EtherFast LAN Card for Wake- On-LAN Use Testing Link Change Sending a Magic PacketClient for Microsoft Networks Windows LogonAppendix Novell 3.x Client Setup for Windows 98 or Twisted-Pair Cabling Cabling Rules Meters 328 feetTroubleshooting Troubleshooting Hints for Windows 95Solution Solutions Running the Card’s Diagnostics Cd a\diag diagAppendix Installing Windows Network Components from Scratch Starting Over WindowsAppendix Appendix Appendix Manually Installing Network Components Windows Click on Start, Settings, then Control PanelIPX/SPX-compatible Protocol Client for Netware NetworksNetBEUI LEDs LNE100TX EtherFast 10/100 Network CardSpecifications Customer Support Fax Bulletin Board Customer SupportWeb FTP Site T p / / w w w. l i n k s y s . c o m